Failed Beech Dismantle

[SamTree]

 

Big failed included union and further split that was opening and closing in the wind. But not too big a problem with a remote anchor behind and no targets below. Good fun slotting it down with the 560, just a tad difficult to hold position without stropping in. Ta

[flatyre]

nice work there, nasty job!

[MattyF]

SRT and a 560 you can't go wrong for tearing down a tree!

[woody paul]

Good job but why climb and sectional fell in a woodland with which looked like a nice ride to drop it in.

[Gray git]

Looks like you have a shorter tether on your wrench now, any chance you could post a decent pick of how you have it set up as really fancy trying the same setup.

Cool job and nice video.

[Pete Mctree]

Smash n crash

[mistahbenn]

Vibert

[TTP]

Nice methodical take down there with good cuts and a great saw to match. Looked a nice day to almost forgot the sky goes blue. Shame the stem got felled though. That split would have been a great home for beasties.

[Rich Rule]

Nice work mate. Did you have to clear all the brash as well?

[SamTree]

Good job but why climb and sectional fell in a woodland with which looked like a nice ride to drop it in.

 

Thanks Paul. I get what your saying but think there would have been a higher exposure to risk with a straight fell. I wouldnt have wanted to stand under that putting in a cut. It was also onto a bit of a bank i would rathet be anchored above breaking up the crown than dealing with all the tension and compression breaking it up on the ground. Always looks differnt on a video thougj 👍