Stihl twist caps 😡😡😡!!!!!

[Marc Lewis]

If many are struggling, there is obviously a problem or its not ideal.

[Joe Newton]

If many are struggling, there is obviously a problem or its not ideal.

 

 

Yup, there's more simpletons out there than Stihl have accounted for

[div_h]

😂 I was one, first stihl machine cap I've struggled with

[div_h]

The saw is still not right, stripped it's down cleaned the carb checked all the fuel lines intake boot took the springs off the clutch everything was all good.

 

When your cutting with its bogs down even when it's just with the weight of the saw but lift it out the cut slightly and it picks up again 😡

[slack ma girdle]

Brilliant, I can not fault them, and you can not over tighten them.

[oldwoodcutter]

These caps have nearly ended in fisticuffs when a climbing saw's been sent up and dumps its oil all over a climbers trousers, and they are not simpleton groundies either.

My gypsy sticks petrol cap was a devil until i changed the tank and cap.

[div_h]

These caps have nearly ended in fisticuffs when a climbing saw's been sent up and dumps its oil all over a climbers trousers, and they are not simpleton groundies either.

My gypsy sticks petrol cap was a devil until i changed the tank and cap.

 

Sorry but what's a gypsy stick

[peatff]

Sorry but what's a gypsy stick

 

Chainsaw on the end of a pole What are the rakers like on your chain ?

[div_h]

Chainsaw on the end of a pole What are the rakers like on your chain ?

 

They look ok will have a look later, I see a pole saw

[Mesterh]

Far better than the old screw types which on certain machines seemed to self tighten.

 

A little tip is to push the cap in before you turn it.