My Vice!!!

[Dave Alviti]

What truck is it? Somebody on here had a 130 tipper, there was a bracket that slid out from behind the cab, swivelled round 90 degrees and locked into position which looked very nifty.

 

 

That was me

 

I've now swapped the vice for a parrot type one that is easily removed from the bracket so no need to turn it, also means the vice lives in the truck and won't go rusty, or walkies!

[doobin]

If you've got a dropside truck of any sort then the easiest thing by far is to use the dropside peg receiver as a receiver for your vice. Usually a good height for working too.

[woody paul]

Just an idea but could you mount the vice on a strong magnet with a kind of swivelling bracket so you could just plonk it on the bonnet and take it off when you had finished? You could put a piece of colth between the magnet and vehicle to save scratching the paintwork. I have a worklight which is like this and it works very well

 

John441

 

Do you know a magnet that will stick to alley as it's going on a landy he said

 

My vice is a small record 1 bolted to a piece of 3/4 ply

[TMB]

TMB, That would be awesome

 

 

Will sort some when I get home at the end of the week internet is rubbish here won't upload photos

[TMB]

[twistedhicap]

If your not towing use a spare face plate for the Dixon bate adjustable hitch, on my 110 hicap I used to have one bolted to the inside of the tailgate !

[Joe Newton]

My vice is touching myself on the bus.

[PeteB]

My vice is touching myself on the bus.

 

So, that is what you do for kicks then, I will pass it on to the local plod....

[Towser]

Ff. bbf. T g c

 

B b

 

 

 

 

 

 

 

 

 

 

 

 

Mm.

 

 

 

 

 

 

 

 

 

 

 

B cb c