Mega quick chip box for a tipper

[padman]

I have bought a LDV tipper haha - need a mega quick method that is CHEAP to make a chip box.

 

Not got a clue about how to go about it, other than I think 12mm ply is the way to go. :001_smile::001_smile:

 

Gis a idea will you

[Fredward]

I made one out of ply and 50x75mm treated pine, with a 1/3 roof made of ply (not in this photo) which is hinged so gets propped up when chpping. Bolted to existing side boards. Works okay but will still more expensive than I thought, and not really big enough. I would have made it higher but the headboard didn't allow.

 

[Tree Man Tom]

Mega quick? Two bits of ply either side to act as high sides. Lie them down when empty as they'll flap. Tie them to the tipper frame so they don't fall out when you tip.

[Ian C]

Three sheets of 18mm ply and some screws/bolts etc is the cheapest and quickest way. £150 sold do it.

[skyhuck]

Three sheets of 18mm ply and some screws/bolts etc is the cheapest and quickest way. £150 sold do it.

 

Your posh!!! I used to use a ratchet strap up and over the top

[hamdogg]

I just use box section steel for the frame and sheet aliminum! Simple and cheap!

[Ian C]

Your posh!!! I used to use a ratchet strap up and over the top

 

Us Yorkshire guys know how to do it!

[Hodge]

Us Yorkshire guys know how to do it!

 

 

Tight more like;)

[Ian C]

Tight more like;)

 

I like to think of us as Carefull hodge!

[treequip]

Us Yorkshire guys know how to do it!

 

You can always tell a Yorkshire man, But you cant tell him much:001_tt2: