110 Tipper.

[White Noise]

Couple of my old 110 tipper . Also has tool box on the r rack .

[Tom D]

Thanks guys.

 

Yes the trailer snaked and rolled flipping the landy. The plywood bulkhead behind the seats added a bit of stiffness, which saved the driver a headache I reckon.

[Matthew Storrs]

Thanks guys.

 

Yes the trailer snaked and rolled flipping the landy. The plywood bulkhead behind the seats added a bit of stiffness, which saved the driver a headache I reckon.

 

Sounds nasty- glad he was ok:thumbup1:

[treefrog]

 

 

This is mine it's been great I had a 130 for a couple of months but could not get used to the barge like handling and steering.

[Tom D]

The cab is now fixed and we are now about to start on the chip box, so any advice appreciated on size. How much higher that the roof would you go? and how much overhang of the rear cross member?

 

We will have two tool boxes either side, any tips on waterproofing, do you find that water ingress is a problem with ropes and kit etc?

[fergusonforestry]

bloody hell hope everyone was ok Tom! here's a pic of the one my pal had(has? was for sale) (130 is a standard wheelbase from factory now, they used to be stretched 110 chassis by special vehicles but not for some years now, special vehicles will build you one up to around 150" if you so wished)

[scraggs]

I know it would be hard to do on a 110 because of it being shorter but I have noticed that putting the tow bar straight on the cross member with no overhang has made it a really nice stable tow motor.

[fergusonforestry]

back of stevies one (just had a look still on ebay if anyone interested?)

[pie eater pete]

My 130 is getting done soon-about 4ft6 high iirc including a top scoop.

[Big T]

back of stevies one (just had a look still on ebay if anyone interested?)

 

Saw this on eBay! Looks like a good wagon but I'm all the way down in Cornwall!