Sugihara. Vs. original bars.

[Stubby]

Is the price "Ferrari v wheelbarrow" ?

 

[mendiplogs]

Is the price "Ferrari v wheelbarrow" ?

 

HI GUY no mate only £10 or 2 on top of a new husky 560 just ask when you buy a new saw put a ROB D BAR thats cheapest way:thumbup1: thanks jon

[TIMON]

HI GUY no mate only £10 or 2 on top of a new husky 560 just ask when you buy a new saw put a ROB D BAR thats cheapest way:thumbup1: thanks jon

 

 

Nice one Jon .

That's good to know.

I thought they would be loads more.

Thanks, Timon

[TreeswingerPerth]

Been here before , Sugi are the dogs , no doubt about it .

[steve collins]

stick to oregon id say, the noses are rubbish fitment into the bar itself and your paying for something thats a bit lighter, ive tried them and cant see the point in the extra £28 quid i can get two oregons for the price of on sugihara. i know what id rather spend my money on

[Stubby]

Never had a problem with the sprocket noses but then I don't ever grease them . Think they last better for not greasing .

[normandylumberjack]

Is there one available for the T540xp yet? in 12".

[steve collins]

Im not talking about greasing im saying the rivets which hold the nose to the bar have always come loose leading to a new nose being needed

[Rob D]

stick to oregon id say, the noses are rubbish fitment into the bar itself and your paying for something thats a bit lighter, ive tried them and cant see the point in the extra £28 quid i can get two oregons for the price of on sugihara. i know what id rather spend my money on

 

 

Really? First I've heard that the fitting of the nose to the bar is 'rubbish'. When did you try them/what size type and for what saw? When did you find the nose come loose?

 

 

You're paying for something that's lighter and that will also well outlast any oregon powermatch bar ...

 

 

The noses are fitted perfectly with 3 rivets onto the bar - better IMO than the single rivet on the oregon powermatch.

 

 

 

[Ian Leach]

Really? First I've heard that the fitting of the nose to the bar is 'rubbish'. When did you try them/what size type and for what saw? When did you find the nose come loose?

 

 

You're paying for something that's lighter and that will also well outlast any oregon powermatch bar ...

 

 

The noses are fitted perfectly with 3 rivets onto the bar - better IMO than the single rivet on the oregon powermatch.

 

 

 

 

Maybe the nose was replaced and not fitted properly by user.