Jump to content

Log in or register to remove this advert

Statutory clearance for highway


treebloke
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

Received a letter from Devon C.C requesting 6 meters for surface dressing back in February.I gave them a ring,thinking the legal requirement was about 5.2M ,and was told it needs to be 6 meters to tip the chipping lorries.

Link to comment
Share on other sites

I was looking up similar earlier this week.

 

Found this on a google search, came off some LA's webpage can't remember which LA: "There is a responsibility placed upon the highway authority to maintain roads to a condition fit for the traffic that might ordinarily be expected to use it. Unless there is a traffic order in force restricting the size or height of vehicles that can use a particular road, a vertical clearance of 17 feet (5.20m) shall be maintained to allow sufficient clearance for vehicles which might ordinarily be expected to use the highway to gain access."

 

Had a quick look at Mynors and there's loads in there but too much to re-type here! Hope that helps....

Link to comment
Share on other sites

We work to 5.2m (17') above the carriageway and 3.0m (10') above the pavement (footway) as a minimum. That's what it states in the LA guidance. In reality we sometimes go higher depending on client's spec or to prevent future problems.

 

:thumbup1:A bit of future proofing is good :001_smile:

Link to comment
Share on other sites

As a truck driver I cannot believe the lack of roadside vegetation control on some busy roads in East Yorkshire. The hedges and trees encroach beyond the tarmac edge and buses and truck mirrors whack it. Or oncoming traffic if prefered! Cyclists give it a wide berth.

 

At least its farmer season now. Big bales stacked high on condemable artic trailers snapping trees out. Would be a good time for authorities to follow the trails of straw attached to vegetation, all narrow poor clearance stuff is well decorated with straw.

 

I would of thought in line with highway bridges all under 16ft have to be marked, so surely if routes are not marked as such ALL the route should have 16ft clearance. Thats 4.87 mtrs. With a little more for droop or when branches are wet. 5.2m sounds a good minimum.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.