Echo CS360 TES top handled saw

[andrew t]

The Oregon spouts are supposed to fit I have just ordered some .

[andrew t]

Cheers for the reply regarding chains .

I'm on the standard 12inch bar with Oregon chain the bar is tsumura so I just want to change the chain .

[spudulike]

Let us know what the chap thinks of the mod Spud. I'll be keen to send mine up if it works out

 

Sent from my SM-G930F using Arbtalk mobile app

 

The guy was raving about how good it was when he picked up his other saw so there you go!

[kcstevens]

Haha. Then I must be a sheep and follow suit!

 

Sent from my SM-G930F using Arbtalk mobile app

[TIDY]

The Oregon spouts are supposed to fit I have just ordered some .

 

Hope so Andrew, let us know when you get them

[billpierce]

Hunersdorff combi cans fit but its very tight. Think they make the oregon ones so should be the same

 

Sent from my GT-I9300 using Arbtalk mobile app

[spudulike]

Haha. Then I must be a sheep and follow suit!

 

Sent from my SM-G930F using Arbtalk mobile app

 

Choice is always the customers prerogative, the workshop is full of saws, I am generally pretty busy all the time - I have never advertised.....sort of says it all:thumbup:

[wyk]

If you are still having muffler issues, I believe the 350/355t muffler fit right up. They have no baffle or cat.

[wicklamulla]

On 24/10/2018 at 10:20, wyk said:

If you are still having muffler issues, I believe the 350/355t muffler fit right up. They have no baffle or cat.

Hello Wes,  long time no see.  I had Spud fit a de-catted 360 muffler to my 360TES and he tuned it up fer me,  it's a good improvement.  I'm waiting to hit him up at some point to see if he wants the saw back with view to porting it for me.  Literally about to order a 14'' and a 16'' bar and chain in the tiny 0.43 size for my 360TES from RobD as the stock cutting gear is 'a bit too chunky and lumpy' in my humble onion. 

[wyk]

6 minutes ago, wicklamulla said:

Hello Wes,  long time no see.  I had Spud fit a de-catted 360 muffler to my 360TES and he tuned it up fer me,  it's a good improvement.  I'm waiting to hit him up at some point to see if he wants the saw back with view to porting it for me.  Literally about to order a 14'' and a 16'' bar and chain in the tiny 0.43 size for my 360TES from RobD as the stock cutting gear is 'a bit too chunky and lumpy' in my humble onion. 

I ended up with a 361WES, because...well...it had my name on it. It's replacing an MS171 on the estate, so I think it's an upgrade. In the process of getting it set up for duty as a little trimmer.