Fumes and nausea

[Ian C]

What's the score eddy with aspen and auto tune saws? Most of my stuff is running well but our 576xp refuses to run right on it,put pump fuel in and it's fine.

[Eddie@aspen]

What's the score eddy with aspen and auto tune saws? Most of my stuff is running well but our 576xp refuses to run right on it,put pump fuel in and it's fine.

Hi Ian,

 

Auto tune and M-tronic saws all work fine with Aspen!

 

If there is a set up procedure of say running flat out and then idle then you may have to follow that from your owners handbook.

 

We now have over 260 dealers and many are only using Aspen for all the machinery they service and sell. We have had no reports of any problems with electronic carburettors running our fuels. If you have any more questions please contact me direct on 07568 108953 or email [email protected]

[mendiplogs]

Hi Ian,

 

Auto tune and M-tronic saws all work fine with Aspen!

 

If there is a set up procedure of say running flat out and then idle then you may have to follow that from your owners handbook.

 

We now have over 260 dealers and many are only using Aspen for all the machinery they service and sell. We have had no reports of any problems with electronic carburettors running our fuels. If you have any more questions please contact me direct on 07568 108953 or email [email protected]

 

HI EDDY IT GOOD IN MY 560 thanks jon

[humpo48]

HI EDDY IT GOOD IN MY 560 thanks jon

 

 

Jon, where do you get your Aspen in Somerset? Want to use it in my hedge cutters mate.

[Eddie@aspen]

Jon, where do you get your Aspen in Somerset? Want to use it in my hedge cutters mate.

You can use our dealer finder on the aspenfuel website

 

Just type in your postcode and it will list dealers in that area.

 

If there is no one close to you let me know the name of your local shop and who to contact and I will see what I can do.

 

Thank you for trying Aspen

[humpo48]

You can use our dealer finder on the aspenfuel website

 

Just type in your postcode and it will list dealers in that area.

 

If there is no one close to you let me know the name of your local shop and who to contact and I will see what I can do.

 

Thank you for trying Aspen

 

 

Sounds like a plan, thanks. PM Sent

Edited April 4, 2015 by humpo48

[Stephen Blair]

Well that's nearly a year I've been running Aspen, I never feel like I used too at work.

I bought a pallet of 5 litre cans and still have a dozen or so left.

[john k]

What's the score eddy with aspen and auto tune saws? Most of my stuff is running well but our 576xp refuses to run right on it,put pump fuel in and it's fine.

 

 

I've been using Aspen for about four years now in a 346XP and for the last couple of years in a 560XP as well. Neither have missed a beat, despite one or other of them sometimes not bring used for a couple of months at a time.

 

The times I really appreciate it is on the odd occasion where I use someone else's saw running pump fuel!

[Eddie@aspen]

I've been using Aspen for about four years now in a 346XP and for the last couple of years in a 560XP as well. Neither have missed a beat, despite one or other of them sometimes not bring used for a couple of months at a time.

 

The times I really appreciate it is on the odd occasion where I use someone else's saw running pump fuel!

Thanks for you feedback John!

 

If you would like to email me with your thoughts on what Aspen does for you I will pop it on our website for others too see what real users think.

 

Thanks again for using Aspen fuel.

 

All the best

 

Eddie

[Stefan Palokangas]

The first job i did with the grinder was beside a fence and was so near with the wheel to the fence all times, so i stood infront of the machine, not thinking the fumes points directly forward. Was a very bad experience not to be repeated, actually the picture below my name shows just that job.