Husqvarna 338xpt

[crackoff]

As above, does anyone use one? feedback, if poss.

 

Good points?

Bad points?

 

Cheers all:thumbup:

[Stubby]

I had a California spec one ( 45cc ) and due to the strict emissions control in that state it could not pull the skin of a cold rice pudding .....

[MattyF]

The last run they made of them they upped the cc and made a few changes on the weak spots of the saw but from its start as the 335 it was regarded as a bit of a disaster that husky never really got over, hence why the had to get the t540 spot on , I didn't mind it as a saw but still picked up the 200t over it.

The later model is on the left so will be worth more.

 

 

 

Sent from my iPhone using Arbtalk

[spudulike]

The oil adjuster can be a bit iffy, they need to be revved out before hitting the wood otherwise they bog down unlike the MS200 which will rev through it - they are a bit similar in that respect to the MS201!

[Old Mill Tree Care]

I used one a long time ago and remember thinking it was really awful.

[Stubby]

- they are a bit similar in that respect to the MS201!

 

Exactly what I was thinking Steve . New I had come across it before !

[crackoff]

As someone that wont be up tree's 24/7, (after I get the tickets) like a lot of you guys... probably only a few times a year, would it still be worth my while going for a 540???

[Johny Walker]

had a 338 yrs ago bag of nails,totaly gutless ,

[crackoff]

The feedback so far is very positive...

 

Think after I get the tickets I'll go for the 540... even the extra cost for someone not going to use it much seems a necessary evil.

 

Thanks guys.

[pie eater pete]

If your like me and a little limp wristed and carry a handbag hows about a Ms150?!