Jump to content

Log in or register to remove this advert

Spuds Porting and Tuning Thread


spudulike
 Share

Recommended Posts

Log in or register to remove this advert

If I can arrange it and get the time out, I will compare it to my ported 357XP, a local guy has a huge lump of beech that needs cutting up and just need a little help with the camera!

 

Burrell was up for it so just need to find a suitable time, may even get the Big Green Beast out as well and see how that goes now!

Link to comment
Share on other sites

Glad you did check it !! Sorry I can only think I got distracted with rebuilding the starter assembly as it was mangled from the seizure...and was so pleased that I managed to scavenge the bits off broken units and not having to buy a new one in the excitement I over looked those... Good thing your so thorough mate !!

Got to admit I'm really pleased it's ticking over!! Can't wait to see the vid of it in action.

Link to comment
Share on other sites

Just got my ms200t back from spud. I got this saw cheap off ebay and it was in a pretty rough state. I needed a saw that was reliable so instead of me trying to fix it with my fists of ham I thought I'd send off to someone who knows what their doing.

The saw now runs like new and the extra power of porting is noticeable and pretty much awesome I couldn't be more happy with the service I've had.

 

I had to either buy a 201 or refub a saw I'm glad I went down the referb route, it was far cheaper and I've got a better machine out of it.

 

Just a note: I was forced to get another saw due to the reliability of the husky 540.

 

Anyone in the same boat I recommend giving a 200t a new lease of life

Link to comment
Share on other sites

Just got my ms200t back from spud. I got this saw cheap off ebay and it was in a pretty rough state. I needed a saw that was reliable so instead of me trying to fix it with my fists of ham I thought I'd send off to someone who knows what their doing.

The saw now runs like new and the extra power of porting is noticeable and pretty much awesome I couldn't be more happy with the service I've had.

 

I had to either buy a 201 or refub a saw I'm glad I went down the referb route, it was far cheaper and I've got a better machine out of it.

 

Just a note: I was forced to get another saw due to the reliability of the husky 540.

 

Anyone in the same boat I recommend giving a 200t a new lease of life

 

Thanks Chris, a pleasure and thanks for the good rep:thumbup:

Link to comment
Share on other sites

Hi Spud, just giving you a heads up:

 

[ATTACH]175762[/ATTACH]

 

This arrived today. The warranty is 2 years. I trust that'll be enough time to figure out how to work your magic on it? :biggrin::laugh:

 

My guess is Steve would start by adding a chain...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.