bar and chain

[mendiplogs]

does anybody know what oregon 12" bar and chain fits a neilsen MT-7777.

 

Hi wood I'm sorry to sound hard mate skip the get a husky or a Stihl welcome to the forum mate Jon

[Kay 9]

Pics would be a great help to the lads on here. It's more than likely an oregon bar and chain me thinks. Hope your better soon. Wasn't a sawing accident by any chance?

[woodman1]

Pics would be a great help to the lads on here. It's more than likely an oregon bar and chain me thinks. Hope your better soon. Wasn't a sawing accident by any chance?

got pinned on some rocks while white water canoeing

[doobin]

52cc chainsaw that comes with a 12" bar lol

 

To be fair, that 52cc won't generate that much power so 12" is probably about right. Much better than certain cheapo manufacturers who would have an 18" on the same size saw so it looked 'macho' to sell to idiots.

 

The saw is obviously not going to be brilliant. But for spanners, sockets, tape measures, knives etc, Neilson are excellent. They're taking over from Silverline in the 'cheap but decent' category in my opinion.

[woodman1]

this is a scan of the bar with dims.holes 26mm center to center.

hope this helps

Edited October 3, 2013 by woodman1

[predator]

JUST COUNT THE DRIVE LINKS that should then give you an idea what to look for when searching for your parts

[spudulike]

From the dims, it looks to be damn close to the Husqvarna small mount used on the 345,350,346,357 and many more models, same slot size, same adjuster holes and oiler hole position!

[woodman1]

what i need is a part no;s for 12" oregon bar and chain for the above mentioned chainsaw.i know its a .325 and 56 links

[Eddy_t]

K095 mount on these Chinese saws, they just have more drive links than a husky for some reason

 

 

Sent using Arbtalk Mobile App

[spudulike]

what i need is a part no;s for 12" oregon bar and chain for the above mentioned chainsaw.i know its a .325 and 56 links

 

There is no 12" available, just 13": -

 

1.3mm Gauge

Pro AM - 130MLBK095

Micro Lite Pro- 130MPBK095

 

1.5mm Gauge

Pro Am - 138PXBK095

Power Match Plus - 138RNBK095

Pro Lite - 138SLBK095

 

1.3mm will suit a lower power saw, all are 56 link 0.325 bars - The Microlite Pro with a 95VPX chain is a fast cutting low kerf solution.

 

Please don't blame me if this doesn't work out, just trying to give help with the info to hand!