How to put a belle petrol mixer onits stand on your own!?

[Big T]

Hiya,

 

I have a belle petrol mixer with a Honda engine on it. I work alone and need to be able to put it on the stand on my own, I have downloaded a manual and it says to put the mixer on the ground face down then insert the stand and pull it upright. In the diagram it shows an electric mixer, it it ok to do it this way with a petrol one? Wouldnt it leak oil or oil run into the cylinder??

 

Regards,

 

Anthony.

[SEAN TYNAN]

should be fine i have done it lots of times with a petrol mixer

[swinny]

Not sure. I use a 150 mini mix think it is. N just lift it on

[s.varty]

should be fine i have done it lots of times with a petrol mixer

 

Me to, no problems:thumbup1:

[Hodge]

No problems, easy peesy!!

 

 

Sent from Outerspace.

[muttley9050]

I use my belle petrop mixer most, easiest way for me to put on stand is to rest mixer on back and handles, put stand in hole and lift handles to raise. I've seen people balance mixer on drum but this looks stupid to me. Always find it starts easier if I wait 2 mins for oil to level before trying.

James

[Hodge]

But do it before you fill it with petrol.

 

 

Sent from Outerspace.

[Dorset Hedgelayer]

years ago just lift it on, but now rest on drum or handles tilt job done

[Gareth Dalzell]

The instructions of how to single handed get the mixer onto the stand are inside the flat on top of the engine/motor. Push it forward onto the drum lip, push the stand on to the wheel axle, engage the mounting clip and then using the handles lift and push it up onto the stand. Job done.

[Big T]

Cool, thanks!