Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

What would you have done differently if there was no wind on day two? Did you plan it the way you did it from the outset?

Log in or register to remove this advert

Posted
1 hour ago, AHPP said:

What would you have done differently if there was no wind on day two? Did you plan it the way you did it from the outset?

The tree closest the road/wall/wire was the only tree that definitely needed some rigging. It was the simplest way to swing the limbs forwards and lower them down the front of the stem, and closest to the chipper, the wind when it arrived didn’t really interfere with the plan so we continued with what was working. 

Posted
8 minutes ago, AHPP said:

OK. Why negative rigging instead of dropping the 2.1s?

There was only one negative rig on the second stem after a few lumps had been chogged down, that piece was taken at the point we reached the 30cm DUB spec. 
There would have been a further nine 2.1’s to come off, easier and safer to measure and accurately cut that on the ground rather than in the tree. 

Posted (edited)
4 hours ago, 5thelement said:

There was only one negative rig on the second stem after a few lumps had been chogged down, that piece was taken at the point we reached the 30cm DUB spec. 
There would have been a further nine 2.1’s to come off, easier and safer to measure and accurately cut that on the ground rather than in the tree. 

Did the sawmill give you a drink for the pieces, or were you just happy to get rid?

Edited by Mick Dempsey
Posted
1 hour ago, Mick Dempsey said:

Did the sawmill give you a drink for the pieces, or were you just happy to get rid?

€400 for eighteen 2.1 metre and a saving of a days time ringing up, fuel and running the transit away. 

Posted
2 minutes ago, 5thelement said:

€400 for eighteen 2.1 metre and a saving of a days time ringing up, fuel and running the transit away. 

When I think about the stuff I’ve given away…

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.