One reason I use Aspen

[NI Tree]

We have no dealers at this time. Sorry I will work on this in time.

 

in time

 

ps i have told you who to try but you did not look him up you just jumped to conclusions

[Eddie@aspen]

Hi Eddie my stihl 4 cycle 2 stroke hedge cutter has been in my local dealers for a service as it was running rougher than normal:sneaky2: and on stripping it down they found that the internals of the engine and carb had a sticky residue, it was cleared and the engine run up but the mechanic still was'nt happy so stripped it back down to find the residue had returned, now the cutter has only been used with aspen, any thoughts on what and why this is happening please.

Hi, From the limited information (unkown colour of residue) guys from Aspen Sweden think this is oil from the fuel. If a 2stroke engine is running too slow it may oil up, or if it is just blipped and not given a good run at full speed.

 

Hope this helps

[Eddie@aspen]

in time

 

ps i have told you who to try but you did not look him up you just jumped to conclusions

Hi, Please give me the names of the machinery dealers near to you and I will see what I can do to help.

[Daniel Jiggins]

Just purchased some more Aspen

 

 

Sent using Arbtalk Mobile App

[Eddie@aspen]

Big thanks to everyone at ATS Machinery in lower beeding.

 

Fitted new diaphragms and pump piston kits to 3x Stihl MS200T. Pro user had switched to Aspen from pump fuel and his saws started to have poor running after a short while.

As I have posted before this can happen in some cases. The ethanol and solvents damage the rubber parts. Now they have been changed they will last for years running on Aspen!

[Daniel Jiggins]

Big thanks to everyone at ATS Machinery in lower beeding.

 

Fitted new diaphragms and pump piston kits to 3x Stihl MS200T. Pro user had switched to Aspen from pump fuel and his saws started to have poor running after a short while.

As I have posted before this can happen in some cases. The ethanol and solvents damage the rubber parts. Now they have been changed they will last for years running on Aspen!

 

Ive just starting using Aspen in all my machines how long does it normally take for problems to occur running wise if at all?

[MattyF]

Ms200's about 2 tanks.

[Daniel Jiggins]

Ms200's about 2 tanks.

 

Ive done about 5 or 6 tanks on my 200T with Aspen so should be ok then, Touch wood all my gear seems to run really well on it.

[nepia]

Big thanks to everyone at ATS Machinery in lower beeding.

 

Fitted new diaphragms and pump piston kits to 3x Stihl MS200T. Pro user had switched to Aspen from pump fuel and his saws started to have poor running after a short while.

As I have posted before this can happen in some cases. The ethanol and solvents damage the rubber parts. Now they have been changed they will last for years running on Aspen!

 

 

They've done a lot more than three! Frankly I think they've had enough fixing of older machines that have succumbed to fuel change (!) but the Aspen isn't to blame: the problems would surely have occurred sooner or later anyway.

 

Both my older saws are getting pulled apart and having rubbers replaced before I switch them to Aspen. One's done, the other will be when the firewood season draws to a close.

 

Jon

[NI Tree]

Hi, Please give me the names of the machinery dealers near to you and I will see what I can do to help.

 

our dealer likes it lots but does not stock it due to the cost but i think thats from huskies day when they sold it he is arb ireland

 

i am sorry if i have been a bit hard on you. Desmond Wightman arb ireland is a brillent saw dealer and a quite a few members use him

this is his ebay store

Husqvarna Spare Parts, Lawnmower Ride-On Parts items in ARB Ireland store on eBay!