Emergency- Vermeer 935i key!

[Billy]

Lost the key from my 935i today with Perkins engine. Vermeer want about £200 for new one with barrel, even though I suspect they're all the same! So, could someone be so kind as to cut me one off theirs and post it to me?

 

Thanks, Bill

 

 

---

I am here: http://maps.google.com/maps?ll=51.367315,0.031085

[redmoosefaction]

I got a load of 'vermeer BC150' keys from my local security/ key cutting place, I think they fit everything e.g. excavators, dumpers etc etc. they were ready made!

 

Mine were about £5 each.

[mixedangased]

Lost the key from my 935i today with Perkins engine. Vermeer want about £200 for new one with barrel, even though I suspect they're all the same! So, could someone be so kind as to cut me one off theirs and post it to me?

 

Thanks, Bill

 

 

---

I am here: Google Maps

 

go into ermin plant or the likes they should have one,or any plant suppliers

[PeteB]

Billy is in Croyden so Ermin is a tad far for a key. Try nadgering the barrel as may be able to do it with a screw driver.

[tommer9]

vermeer are extortionate for parts......

[Robert_S]

£200 for a key, it must come in its own taxi with a half naked lady carrying it on a red velvet pillow!!!!

 

As pete b says screw driver and hammer, jobs a good un:biggrin:

[treequip]

Will this one do it?

RONIS 455 GENERATOR KEY - FREE UK POST! | eBay

 

 

If not don’t listen to the heathens with screwdrivers, probably getting nostalgic about their days of twocking old fords.

 

Go to a decent lock smith they will have or can make a key, or go to an auto electrician and get him to jury rig an on switch and a starter button, that way you can get a key for the barrel you didn’t trash.

 

Or if you have a key that will fit in the barrel, and you can get the barrel out, put the key in and file off any brass tabs that show themselves, once re assembled the key will work and so will the original (and probably a few others as well)

[Billy]

I believe the bc150 uses a kybota engine and ignition, so will have the big chunky metal key. This ignition has a thin key. Don't fancy screw drivering it and I don't know what else uses the same ignition, if it comes to it I'll just fit an aftermarket ignition. But it'd be much easier if someone could get one cut for me off their existing one, I'll pay of course :-)

 

 

---

I am here: http://maps.google.com/maps?ll=51.377052,0.490527

[Billy]

vermeer are extortionate for parts......

 

What is the alternative?

 

 

---

I am here: http://maps.google.com/maps?ll=51.374040,0.480499

[Johny Walker]

What is the alternative?

 

 

---

I am here: Google Maps

 

local outo supplies ,new egnition ,lucas type ,£10 @ most ,fit it yr sen