Big job, may need a hand ??

[Dean Lofthouse]

Just been to price this huge job.

 

Spec is to Prune / Reduce the cherry below.

 

It is all of 12ft high and mainly epicormic recovery shoots from a previous butchering episode.

 

Not sure I can take this job on on my own, my be too big for me.

 

Will advise the client to either leave the tree be till it recovers from the last episode or to save it from further butchering just take the poor thing down.

 

As you can see it was a little windy and Teddy on my bonnet was feeling a little chilly, have to get him a coat

[David Humphries]

Just been to price this huge job.

 

Spec is to Prune / Reduce the cherry below.

 

It is all of 12ft high and mainly epicormic recovery shoots from a previous butchering episode.

 

Not sure I can take this job on on my own, my be too big for me.

 

Will advise the client to either leave the tree be till it recovers from the last episode or to save it from further butchering just take the poor thing down.

 

As you can see it was a little windy and Teddy on my bonnet was feeling a little chilly, have to get him a coat

 

 

 

 

 

 

Will your RQ reach that height?

 

 

The outreach might struggle a tad, set up this side of the fence.

 

 

D'ya wanna borrow a real mans MEWP

 

 

 

 

 

 

.

[Mike Hill]

If you do get the job Dean,it should easily pay for a new paint job on your landy.

 

And a coat for Teddy....you miserable sod.

[Steve Bullman]

i'll buy the timber off you dean

[Mike]

And remember to give Buzz a call!!!!

[Dean Lofthouse]

It is actually just over the road from PeteMcTree's house, wonder if he will sub in as a climber, could possibly do with two sets of rigging gear.

[Steve Bullman]

seriously though, i would like the wood. let me know your address and i'll send you a large SAE

[treequip]

seriously though, i would like the wood. let me know your address and i'll send you a large SAE

 

Is this for your pencil making venture?

[PeteB]

No, tooth picks.

[Dean Lofthouse]

seriously though, i would like the wood. let me know your address and i'll send you a large SAE

 

Might have to take you up on that Steve, might burn out my chipper.

 

I'll have to log it up into 2 inch lengths