Jump to content

Log in or register to remove this advert

What's on your bench today?


spudulike

Recommended Posts

Yeah, i found that out when i bought one several months ago. As you say, shiny nasty plastic which doesn't fit properly. I thought that I had managed to get it on the cylinder, with much struggle, but must have crushed part of it in the process. Just had to fit a new P&P and a proper boot.

 

Can you sort the autotune carbs? If got a Husky topper that I could drop round.

 

probably, can take a look and see what gives! Been a while!

Link to comment
Share on other sites

Log in or register to remove this advert

Widened & increased height 2mm & dropped 1mm. spare pot so I am experimenting a little

 

Just be aware that the piston skirt doesn't allow for much widening on the exhaust and the ring ends will cause issue on the inlet unless you take it easy!

 

If you did 2mm either side then Oooops, if it is 1mm either side then you should be OK!

 

If you free port then you will probably get a very sluggish pickup:thumbdown:

Link to comment
Share on other sites

The things you end up fixing.....here is the Mini Moto bike that is owned by the son of one of my wifes bookkeeping clients. It wouldn't start well and suspected fuel issues. The motor looks to be a Maxtra long reach trimmer engine, the carb is a copy of a Walbro Wyk and after a few strips, adjusted the "hidden" needle screw, the H speed screw, sorted out the main diaphragm and spacer being the wrong way round and then found the high speed check valve was a bit blocked and once this was done, all was good:thumbup:

 

Also had this saw in with an interesting chain:confused1: The owner had noticed!

bike.jpg.7fe59d08514cdebf6f0368f155e2eac5.jpg

chain.jpg.32978acf0f7da7efc4791e74e8d921d7.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.