Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Have a pair of leather work gloves that are covered in chainsaw bar oil. My wife wants to throw them out, but before doing so, can anybody advise on how I can clean/restore them?

Log in or register to remove this advert

Posted

Without googling it first, my gut instinct tells me to scrub them with plain old vegetable oil first, then have a go with fairy liquid and warm water, rinse well, then dry them by wearing and using them, then treat them with a leather product. 

  • Like 1
Posted

I'd add, put a pair of latex gloves on, wear the dirty ones and give them a good scrub in sawdust first to get the worst of the surface oil off (could use cat litter too but remember to remove the cat sausages first else you'll get double complaints). Easiest to wear them to scrub off the oil. That might be enough, washing with soap will remove the natural oils I think so will need treating after - car leather seat cleaner perhaps?

  • Like 1
Posted

That was kind of my thoughts, kick on with them as they are. A pair of leather gloves I had once used to get much too hard and stiff after they'd been soaked and then dried. I got pissed off in the end and deliberately coated them in chain oil. They were lovely and supple after that, with the added bonus of being a bit more waterproof. Too slick and slippery initially but that soon wore off.

 

 

  • Like 1
Posted
14 minutes ago, Mick Dempsey said:

Wipe it off with a cloth, put them aside for a day for it to dry out, then just use them.

 

 

 

 

I once left damp gloves to dry out in a wood store. When I next put them on they felt even wetter.

 

Thought at first the roof must be leaking - then the smell hit me - fox pee!

  • Like 1
  • Haha 1
  • Sad 1
Posted
5 hours ago, sime42 said:

That was kind of my thoughts, kick on with them as they are. A pair of leather gloves I had once used to get much too hard and stiff after they'd been soaked and then dried. I got pissed off in the end and deliberately coated them in chain oil. They were lovely and supple after that, with the added bonus of being a bit more waterproof. Too slick and slippery initially but that soon wore off.

 

 

The trouble is the oil has soaked right through to drench the whole glove so not very pleasant at all from a wearing point of view. they are good working gloves so will wash in as hot water as I can stand with fairy liquid et cetera as advised

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.