chipper

[transit]

looking to purchase first chipper must be cheapish 6inch and around 750 weight so my son can tow with combo van any ideas which 1

[Tree cutter Stu]

gota be a timberwolf 150

[transit]

thinking timberwolf not that keen on local supplier

[Mozza]

Or timberwolf 125

[Steve Bullman]

jensen a518. not quite 6" but comes under the 750 bracket with the chute off....nice little chipper

[Ben90]

I heard that only the T150's built in or after 2008 were under 750kg, they made the fuel tank smaller.

[transit]

looks like timberwolf looking to spend 5/6thousand with vat but been told bearings go at about 750 hrs

[Johny Walker]

looks like timberwolf looking to spend 5/6thousand with vat but been told bearings go at about 750 hrs

 

can be less if the operator is a bit dum & runs it on blunt blades

[Ian C]

looks like timberwolf looking to spend 5/6thousand with vat but been told bearings go at about 750 hrs

 

Think Timberwolf reccomend there changed at 500 hrs!

[Rupe]

Older timberwolfs are under 750 if you take the spare wheel off and maybe the spout!!

 

If your spending 5-6k then its goign to bell past 750hrs anyway so just check the service history. My last one got traded in with 900hrs on it on original bearings. I knew they would need changing soon but they were ok at that point. I chnge the blades regularly and look after my machines as best I can.

 

Timberwolf are great for owner operator machines IMO.