Chain oil not coming onto the bar ??

[Khriss]

On 08/12/2020 at 20:37, Ratman said:

What saw is it? might shed more light on the situation.

.... Appen it might be a Chainsaw,   happy to be wrong tho 😋 K

Edited December 14, 2020 by Khriss
Drum drive pumps can be motored witha dremel tool n rubber tip as a quick n quiet check

[Al Slitter]

Greetings All;

I have finally got the machine back together after removing the oil pump and oil pump tubing.

I cleaned them off and used WD-40 in a spray can as a low pressure spray.

The inside of this housing was loaded with sawdust mixed with oil, so clean this area out with

Kerosene and a clean rag. I place the blade and bar back on the saw and tested it.

Oil is now flowing freely from the Bar/Chain. Hurray!

 

The issue I believe was a restriction or plugging up of the tubing running from the oil pump.

As they say alls well that ends well!

 

Thank you to those that tried to help and provided good comments and instructions.

 

Thank Again

[Khriss]

... Wash yr oil tank out monthly an we will never speak of this again 😉 K

 

( Millers take note  😁) 

[Stubby]

22 minutes ago, Al Slitter said:

Greetings All;

I have finally got the machine back together after removing the oil pump and oil pump tubing.

I cleaned them off and used WD-40 in a spray can as a low pressure spray.

The inside of this housing was loaded with sawdust mixed with oil, so clean this area out with

Kerosene and a clean rag. I place the blade and bar back on the saw and tested it.

Oil is now flowing freely from the Bar/Chain. Hurray!

 

The issue I believe was a restriction or plugging up of the tubing running from the oil pump.

As they say alls well that ends well!

 

Thank you to those that tried to help and provided good comments and instructions.

 

Thank Again

Every time you refill wipe the area around the filler before you open it .

[Al Slitter]

11 minutes ago, Khriss said:

... Wash yr oil tank out monthly an we will never speak of this again 😉 K

 

( Millers take note  😁) 

What do you recommend as a washing agent?

 

 

[Khriss]

37 minutes ago, Al Slitter said:

What do you recommend as a washing agent?

 

 

Whatever gets tank deposits out, i usually use old two stroke, then fill up right away, wash caps too. K

[Khriss]

Then, after yr struggles with yr oiling, get one of these an ease yr sharpening. 

 

 

[Khriss]

 

Chain Sharpening Unit Kit Chainsaw Teeth Sharpener Saw Chain Bar Grinding Tool

WWW.EBAY.CO.UK

---

Chain saw grinding accessories: 70mm / 50mm. Usage : It can be easily screwed on the electric grinder, and the chain and comb knife can be easily sharpened. Magic Ball Candle Mold Silicone...

 

 

Bit of a fiddle to fit to yr grinder but cuts nicely without burning an 3 sizes fr yr various chains. 

 

 

 

 

 

 

[Stere]

Quote

Every time you refill wipe the area around the filler before you open it .

 

I bought a little brush on ebay for that 😏

 

Mens Gent Natural Boar Bristle Beard Brush Mustache Hair Shaving Facial Cleaning

WWW.EBAY.CO.UK

---

High-grade and firm boar bristles allows this brush to smooth out tangles. Material: Bristle & Bamboo. Why not try this...

 

[Khriss]

I also found these useful fr removing unsighlty fuzz from yr  airfilter..... 

 

Electric Lady Shaver Bikini Legs Eye Brows Eyebrows Trimmer Shaper Hair Remover

WWW.EBAY.CO.UK

---

Electric Lady Shaver Perfect for Bikini, Legs, Eye Brows f WE ARE A VAT REGISTERED UK COMPANY Perfect for home use or for emergencies Description Ergonomic Safe on sensitive skin...

 

 

 

K