Today's milling

[Rich Rule]

36 minutes ago, Johnsond said:

Decent job for this time of year, 4 days in the dry on a nice level floor and a forklift to do most of the heavy lifting. Variety of hardwoods that the owner wanted milling rather than processing for firewood. Spent a bit of time fitting some decent LED lights recently which for not a lot of outlay have proven to be very handy. 

Pardon my ignorance but is that mobile?  Do you take it to the customers of do they bring the stems to you for milling?

 

thanks.

 

edit:  I’ve just seen the wheels 😜

[topchippyles]

6 minutes ago, Rich Rule said:

Pardon my ignorance but is that mobile?  Do you take it to the customers of do they bring the stems to you for milling?

 

thanks.

 

edit:  I’ve just seen the wheels 😜

You need to get out more Richard 🙂

[topchippyles]

2 hours ago, Mull said:

 

Nice, thankfully your kids don’t look like you. That would be a terrible shame!🤣🤣

 

Bet the mam is real pretty 😙You give out trig 🤭

[Big Beech]

More F2 time this morning on some Canker Ash.

Winch system now installed as well, great asset to the system for sure.

[topchippyles]

Takes all the work out of it with the winch winder 

[Big Beech]

1 hour ago, topchippyles said:

Takes all the work out of it with the winch winder 

Yes,much better.

The winch has been on for a while, just forgot to take the string with me.

Just need to carefully listen to the pitch of the engine to make sure your at optimum revs.

[topchippyles]

15 minutes ago, Big Beech said:

Yes,much better.

The winch has been on for a while, just forgot to take the string with me.

Just need to carefully listen to the pitch of the engine to make sure your at optimum revs.

Never get that issue with the 661 its poetry in motion handled right 😉

[woody paul]

Moved some lumps of Oak for the last time today, only been meaning to mill then for about 5 years. So made a plan to make a start today and was very happy with first cut.

[AJStrees]

Milling some more chestnut for posts.

[Big Beech]

57 minutes ago, AJStrees said:

Milling some more chestnut for posts.

So easy to cut with a good chain !