Jump to content

Log in or register to remove this advert

Srt useage


mikedrums69
 Share

Recommended Posts

Log in or register to remove this advert

Hi Mate,

 

I'm literally just getting into SRT so don't take anything I say as gospel.

 

I've been using my Marlow Gecko 13mm for SRT, simply because it is my only climbing line! It does have a lot of stretch and isn't ideal at all, but it works, especially if your only planning to SRT for those bigger jobs where the thought of thrusting up 10 meters of stem is out of the question!

 

I use a rope wrench and a 10mm prussick cord with a VT tied, I'm just using my DDRT set-up with a rope wrench above it, so simple enough to switch back to DDRT if required in the canopy by just removing the wrench from the system and sticking mycanopy anchor back into my pulley.

 

If I was to  climb SRT all the time I would probably invest in a more suitable rope, one with less stretch.

Link to comment
Share on other sites

I dont climb srt that often,mostly for access so i use my 12.5mm everyday rope(yale xtc i think)

I use my zigzag and rope wrench.

Tried a prune with srt last week and found it less of a challenge than i thought,no friction around the tree made for getting out on tips alot easier than on ddrt.

Link to comment
Share on other sites

Generally I find the less bounce the better.

 

i have accumulated quite a few ropes over the years.  I still have a few lengths of tachyon for the really sappy pine and fir trees out here.

 

i have a few 60m ropes.  Htp Sterling, pretty much like climbing wire.  Cougar orange and the most recent is Samson Voyager.

 

it is handy having a few of the same length out in Norway.  Sometimes the weather is so terrible your kit is frozen solid from the previous climb.

 

i had to use nearly half my flask of premium PG tips the other day just to be able to open my binas.  Obviously a bad move as they froze solid again about 5 minutes later.

  • Like 1
  • Haha 1
Link to comment
Share on other sites

How do you find the Samson rich?.

I’m using non CE cougar blue with the usual wrench hitch climber combo with the hitch which is armour Pruss ,Tied long and as a loose VT as possible, armour Prussik is the only stuff to use imo as it just wont burn out and tolerates long super fast free fall descents no bother and does not bind and self tends lush.
I will try and use a retrievable anchor consisting of an alpine butterfly and ring or the pinto method with a dmm tri lock biner over a base anchor where possible , don’t like the bounce or working with the potential to cut or have bits bounce of the line with the base anchor but they can be handy though if you want to set a few natural redirects to work an isolated bit of crown first from the ground or on the way up then set a tip tie I point or just can’t get a clean throw to set a retrievable anchor... having two throw bags on your line to manipulate a clean rope route is essential though.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.