560 woes

[Pinkfoot]

It's only done 100 odd hours and been run on Redline from birth.

 

Sent from my SM-G900F using Arbtalk mobile app

[spudulike]

Rather send it to you me old mucker.

 

Sent from my SM-G900F using Arbtalk mobile app

 

If you insist:lol: Hopefully it is retrievable.

[Pinkfoot]

I didn't help it by starting it again.

Anyway , I shall send her to the Doctor.

 

Sent from my SM-G900F using Arbtalk mobile app

[Sveriges]

so the piston is well worn and its only done 100 hrs or so. I thought redline oil was meant to be the be all and end all.......

[htb]

You don't seem to have much luck with engines

[Pinkfoot]

You don't seem to have much luck with engines

They treat me badly.

I am making no judgements on wear until Spud has checked it out.

 

Sent from my SM-G900F using Arbtalk mobile app

[spudulike]

They treat me badly.

I am making no judgements on wear until Spud has checked it out.

 

Sent from my SM-G900F using Arbtalk mobile app

 

The autotune will tell me the running hours, will see what gives once here.

[Khriss]

It's only done 100 odd hours and been run on Redline from birth.

 

Sent from my SM-G900F using Arbtalk mobile app

This carry on shattered my faith in husqy's - 560 xpg n 640 xpg both shot after 6months K

 

( Just not even good enuff fr any chinese saw ....)

[Pinkfoot]

This carry on shattered my faith in husqy's - 560 xpg n 640 xpg both shot after 6months K

 

( Just not even good enuff fr any chinese saw ....)

The bloke whos orchard I am cutting In has a Chinese saw and it hasn't broken yet.

I don't want one though.

 

 

Sent from my SM-G900F using Arbtalk mobile app

[openspaceman]

The bloke whos orchard I am cutting In has a Chinese saw and it hasn't broken yet.

I don't want one though.

 

 

Sent from my SM-G900F using Arbtalk mobile app

 

Must have been Karma if you were clearing an orchard

 

Whilst Spud said mine may have been piston slap, as the piston skirt was very thin, I wondered if it might have been the clutch side bearing having a bit of play and allowing the bottom of the piston skirt to touch the bobweight on that side (I suppose the 560 has a disc with stuffer rather than bobweight?) because the triangular bit missing from the skirt was on that side.