Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Unfortunately not my machine but had it available to use till the lad who's machine it is got more and more work of his own.

Eventually would like to put 1 on this valtra which is why I went for a newer bigger model.

 

Sent from my D5803 using Arbtalk mobile app

Log in or register to remove this advert

Posted

have a look on eBay for job 3cx style headlights mount them on a bracket or cage them in and hey presto your legal I would also find some way of disconnecting the front lights on the tractor as I think the reflection off the back off the winch would be a pain in the arse

Posted

Ive got a sign which goes on the front of my splitter when its on the front hydraulic lift of the mog..........it says "your car is my crumple zone"....... folk seem to give it a wide berth

Posted

Gave this a bit more thought.

Make two lightboards, one for each side. Two half size boards would be far easier to safely stow away I reckon.

Manitou telehandler lights are good I reckon, have indicators built in too.

 

Sent from my E5823 using Arbtalk mobile app

Posted

Or headlight /indicator setup off a telehandler front mudguards. Weld a locking hinge on the light bracket and onto the rear of the winch plate either side. Can be folded back behind the winch when using winch, then swing round to position to go on the road, could always fix a couple of side market lights on the side of each headlight assembly, then all sorted

Posted
have a look on eBay for job 3cx style headlights mount them on a bracket or cage them in and hey presto your legal I would also find some way of disconnecting the front lights on the tractor as I think the reflection off the back off the winch would be a pain in the arse

 

 

Not sure about the valtras but on some tractors when you plug extra head lights into the 7 pin plug on the front linkage it switches the tractors head lights off automatically

 

Chris

 

 

Sent from my iPhone using Arbtalk

Posted

Valtra are easy, switch on dash turns them off and flips up to cab lights that are Road friendly with high and low beam controlled on stork same as fronts, also found a handy little plug behind bonnet that comes live when you do this where I can plug in the marker lights.👍

 

Sent from my D5803 using Arbtalk mobile app

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.