leeker

thought the same myself, guess this means it only oils when it needs to lol Ematic chain lubrication system The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

looking for work to boost experience level. Based stranraer willing to travel daily. Anything considered CV available. CS 30/31/38 first aid, own kit, saws and PPE 07938207411

first couple of years can be root growth no ? rather than foliage

thanks mate, you needed too to be honest, got alot wider as i went along about 12 feet at the rear section

hedgeathon from friday, impressive bushes to say the least

Nice work, agree with the shaping , makes it look like a bit more care has been taken.

Check starter motor isn't cracked, seen sparks jumping out of solenoid when trying to turn over

Eucryphia

Are the sprockets jammed with the chains removed ? Considering the bars are 4 years old is say you've got your money out of them

Wondering if anyone is taking on trainees now or in the near future. or part time work. Based in Stranraer, willing to travel. cheers steven contact me on this or phone/text 07470453095

Cordyline removal today

Hi looking for work as mentioned above hard working able to travel and stay till jobs done, whatever the weather. Have own ppe,saws etc. Anything going would be great whever its 1 day or 7 a week. Based in stranraer. Cheers Steven. 07470453095 [email protected]

How much for both ? Sent from my GT-S5830i using Arbtalk mobile app

Haha, its all good took it when i stopped to refuel with the bull

Even managed to sneak a picture in

Was good to help out stevie and rab, one thing for sure i ate my dinner that night

Acquired this today, guy thought it was seized, been lying for years.. Freed pull start off, fresh fuel new plug, 5 pulls later away it went Sent from my GT-S5830i using Arbtalk mobile app

Removed some stumps today.. Anything to keep busy, the tirfor worked a treat. Even brung out the 346 that has been passed down father to son lol Sent from my GT-S5830i using Arbtalk mobile app

I know this will sound daft but when starting th saw from hot.. Try moving th on/off switch to turn the choke on then push it down again to turn off, but don't touch the throttle. Try starting th saw like that. Never had any starting faults with both 550 and 560s. Sent from my GT-S5830i using Arbtalk mobile app

560 xp

Treecore is great till you face away from your climbing line, because of design of bridge, karibeners, prussic etc are always in the way, great apart from tht in my opinion

Posting here as can't post in trading section Looking to sell my current harness or swap/deal for a komet butterfly or skylotec harness as I prefer the bridge positioning compared to mine, size small if possible. Harness is less than year old and has only been used for recreational use and kept as a spare, honestly like new! Message or text me on 07738632113 if interested cheers Steven.

http://brenig.co.uk/?id_product=50&controller=product&id_lang=1 Can't beat it for the price.

email [email protected] mob 07738632113

Hi not the best at advertising myself but will give it a shot im 21 years old, have CS 30,31,32 health and safety at work, and qualified harvester and forwarder operator. Do not currently have climbing or aerial rescue. Been working on harvesting sites for over a year now, felling mainly softwoods of a mixed diameter, some big stuff! snedding, cross cutting, brashing and all the usual stuff. Worked along side winches and other machiney. Looking to get into the climbing side of things now, utility or domestic either or. Purchased my own climbing kit last year and have been learning of my dad(15 years experience, now surveyor for SSE) for the past year, and have built up a good basic skills knowledge, looking to now progress to the next step with training. Any employers out there that would be willing to give me a start or even couple days here and there, to help out and see what its all about!! Being in a lucky situation of my parents staying in Forfar and me coming from Stranraer I am able to travel/work anywhere form Dundee, Perth etc to Ayrshire and Dumfries and Galloway. Have my own saws, PPE etc. Cheers, any help at all would be great.