PaddyFF

I agree with treesrus Griselinia littoralis

I had one 3 years ago to correct a locked knee (bit of cartilage was trapped in joint). In terms of recovering from arthroscopy don't over do it at first. The knee will feel bruised for a while from where they have stuck the tools in. Get yourself in the NHS gym if there is one available. Gym is run by physio's who will give you loads of exercises to strengthen it. You might find your quads depletes a bit so maybe start doing some single leg dips before the op if not too painful. I was back up and walking really quick and did as much as they said I could do little and often. If you have just damaged the cartilage you will be fine. Hopefully they can stitch it as opposed to cutting it out. Ive just had an ACL replacement with a cartilage repair at the beginning of December on the same knee all from original football tackle. Because of the cartilage repair I can't do any deep lunges/squats/dips but am back on site and can do most stuff. No heavy lifting or climbing yet but am on chipper and dragging brash. Physio is boring but going twice a week to NHS gym and should make a full recovery and be back to sport and climbing Good luck with it

Nasty to watch. Looking again it looks like some one got very over eager on the pull line. The whole tree looks like it's going to snap before his back cut even goes in

Looking good aspenarb. Hell of a job to do by hand without machinery

Cheers Willie and Stubby Barrie not sure what this Aspen stuff is you're referring to so will have a good long read. As you know we never get any problems with our tools

Currently recuperating on the sofa after having my cartilage stapled and a chunk of hamstring removed and used to replace a ligament in my knee. Just wondering if there is anyone out there who has had the same op? Fully aware I'm going to be off climbing for a bit just want to know there others who have made a full recovery and are back working.

Thanks for the help. From searching Sophora tetraptera can confirm you're right. Growing in Exmouth, Devon sheltered by larger tree next to it

Spotted this today whilst on a quote. Just intrigued what it is as didn't recognise it. Bit of a dull day so not the best photos and sorry about the head tilt

I'm in a similar predicament at the moment with which saw to buy. One of our 346's has just broken apart requiring a new crank, piston and cylinder, even Spud says its not worth fixing. Don't want to get a 550 as had one already and really didn't get on with it, loads of problems when starting when warm and nowhere near as good as the 346. Have heard loads of problems about the 261 but what other options are there? Open to suggestions Echo, Makita, etc. Want something similar size to 346 for woodland management and chipper saw. What should I get?

Ha thanks, don't think I can get all the credit as Steve had the right guess with Acacia dealbata

Mimosa?

Taking down a mature Monterey in middle of Exeter this week. PM me if you're interested in any of the wood. Good access and all bits cut to manageable size. Thanks Paddy

Thanks Marko. I will dig out the hammer

Definitely looks like it's Oyster Fungus. What does this mean for the tree?

Thanks. Do you think the dark staining might be linked to Kretzschmaria deusta?

Can anyone shed any light on whats affecting this Beech tree? Sorry for the dull photos it was a wet day, also looks like you might have to tilt your head. Thanks, Paddy

We have a VW Caddy with a Predator 360 that just fits with ramps

Thanks mate. Will advise on the mulch. Do you know what the fungi is on the Beech? Would a reduction/thin be a good idea to reduce sail area on the Beech?

I have been sent these photos by a client who is concerned about his trees. As this is starting to get to the realms of my knowledge I wanted some advice on what to recommend. The client doesn't want to cut the trees down, if anything he wants to know if anything can be done to retain them for longer. They are in a large garden, the beech over hangs a private lane to the neighbours property. Photos were taken at the end of August. The Copper Beech is clearly suffering at its graft point and this summer had reduced leaf coverage on the whole crown. The Weeping Ash is completely hollow, one photo is taken looking into tree from a large old wound. There is dieback in the crown and the stem is dead on one side. Any help and advice would be great appreciated.

Awesome

Common in gardens where planted, never seen a naturally occurring one

Thanks. Realise you are not based in the south west but do you know of any firms that would operate in Devon?

I know a hard one to answer but how much could a £1k shredder get through in a day?

Thanks for reply. I agree compost is the logical route to go down. Not sure though how much would have to be stockpiled to make it viable getting a large shredder in for a day. Any idea?

Not sure about paying out but just had really good quote and service from Arborisk