miker
-
Posts
1,245 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by miker
-
had a very disturbing phone call today to tell me that 4 badger cubs have been found dead in a waterbutt,now unless they can climb into a 3 foot high waterbutt ,someone put them in there,this happened in a very large private garden i look after, there is no known set in the grounds,very upsetting and mysterious
-
One-Sixty-Six Dolmar on Ebay; cheap imo for a Cult Saw
miker replied to TimberCutterDartmoor's topic in Chainsaws
are parts still available for them? had trouble getting parts for my 153 -
ill have an 064 if you can let me know how much and what parts are missing
-
give brian foot a call, he is a ford guru, 01962 774209, he will point you in the right direction, http://www.frankfootandson.co.uk
-
surely 1164 was built way before 7610 was around
-
running a bit lean may cause backfiring too
-
those ipl, list all carbs as having an idle screw,this one definately has no idle adjustment,am i having a thick moment? definately only 2 screws, h and la
-
sorry, not my saw,its a stihl yukk!! lol,it has a h screw and a la screw,on the cover it says h 3/4 la 1, but if you set the la to 1 turn it wont start, its more like 1 1/2 turns to get it to run and tickover, checked tank breather all good there, the saw has only done about 3 hours work apparently tho is 2 years old
-
nice job, i do my posts as stub legs ,sat on dense blocks,works fine on lowish decks
-
i very much doubt it, i could be wrong tho
-
how do you adjust the carb on these as there is no hi/lo and tickover,saw starts and runs, but will not restart from hot?? cheers
-
damn good saws imo,did away with the auto decomp on the 2156 tho, seems a lot better for it
-
sorry to hear this, nicking a blokes work tools is the lowest of the low
-
and while were on the subject, what is husky equivalent to jonsered 2149 ? lol
-
i meant the 2156 is a real whizzer, as is the 357
-
already have a 2156 just wondered what its husqvarna brother was,it is a real whizzer!
-
is this the equivalent of husky 357? it is a very fast saw!
-
anybody used one,thoughts please
-
nor me,i suppose i could of got a new carb £115.00 , but couldnt justify spending that much on it,the saw is 20 years old so not to bothered, thanks again for all the help
-
changed the tank,got the carb u/s cleaned, put new needle and metering lever in,pulled it over 3 times ,fired,2 more pulls and off she went like a goodun,set the carb up, cut 3 ash rings, then it stopped and wouldnt start,left it over night ,tried to start,back to old problem,its now on ebay,proceeds are going to a new 372xp
-
thats what i was told when i bought mine
-
its for bar sprocket grease gun
-
i think they are 15500 top rpm, a right little whizzer!!
-
so what is this winter going to be like?have heard various accounts, anybody in the know? anybody claiming to be michael fish need not apply!! lol
-
as above semi seasoned/seasoned 5-10 tons
