GlobalNewark

:thumbup1: Now there's an interesting project, you have my attention.

No worries, I report everything back to Bandit no matter how small as you don't know world wide how many others are having the same issues. You were right about the discharge blockage though, Bandit said short discharge with long flipper, long discharge with short flipper but do not offer both long. we have retro fitted some with no problems.

Can't win them all eh

Neil Hodgson, James Toseland & Melanie Sykes, BT must be in the North of the Uk.

Mel Sykes is a bonus though

Here is the discharge & the rollers again, been available since Sept 13, Ian your demo was over 4 months ago. The demo machine at the time was an earlier model but the only one available then, all machines with these mods are std build & all parts are in stock to retrofit if required.

Let me clear this up one more time, we now fit as std a 22" long flipper so no mess. The rollers turn slower for two reasons, one they are a much larger diameter than most so they turn at half the speed. The engine has a turbo designed to cope with being bogged down where most competitors don't fit one, the infeed is 7x12, if other chippers had an infeed of this size they would stall, double the material going in. If you are not happy with the auto feed adjustments it can be adjusted to suit your preference. We have new shallow curved rollers also fitted as std now. Hope this clears any confusion. Sent from my iPhone using Arbtalk mobile app

Is that a Bandit then?

This is for Seven hours of which you must sit Five sessions, mine is very local to me at Silk Willoughby with a company called Willimott Logistics & Training Solutions Ltd, 07557309883. Helpful chap.

This is a pain & a way of extracting further money, my advice would be to do the course & be safe. After September that's all VOSA will be interested in not your driving licence, they will target people with trailers & 7.5 Tonne trucks as they know we will be the ones without training. I am sitting mine at £35 per session but prices will rocket as more people become aware. What inconvenience will it be to your business if they stop you operating? Sent from my iPhone using Arbtalk mobile app

Yours are the offset teeth, I can supply the straight shank but not offset. I can also get any teeth sharpened & retipped including greenteeth.

That would be Ben, now about Three buildings from us, we have now kept them busy full time for the last year.

I thought genuine Multitip were approx £10ea but I thought the Carlton teeth were unique to Carlton due to the offset mounting, thought these were approx £13-15ea.

Amazing how nobody sees anything, sounds like someone knew you was away?

Is that genuine or non genuine teeth at that price?

Just to keep you all informed we are moving to new premises located approx 14 miles from our current depot in Newark, we had outgrown our current premises over a year ago so due to on going expansion we have decided to relocate. The new address will be: UNITS 5&7 RUSTON ROAD, GRANTHAM, LINCOLNSHIRE, NG31 9SW. We basically outgrew all areas of our business, staff has near doubled & our business grew 120% from the previous year. The new premises will have Three separate buildings for Sales , Service & Parts + we have gained Two new Franchises, One being the Multitek range of wood processors. I have attached a few pics below, if any numbers etc change I will publish here as we go along.

This subject would be easily solved if the boiler manufacturers made their boilers to suit the chip that is produced not vice versa. Most biomass chippers people cannot afford, we have sold our std chippers to supply boilers but the next customer says it must be 100% or the augers will block:confused1: In my experience no Two enquiries are the same, the biomass chippers produce a large amount of fines which causes poor burn quality but no one wants to screen the product afterwards, what to do:001_rolleyes:

I have hired large high speed shredders out last year for this, the stumps have had to be ground down to approx 30mm down to put back into the ground. Even a slowspeed shredder that will shred down to 120-300mm was not suitable. This being said I do not know the legislation just what the customer told me he needed.

I think I have the only ones in the uk, I should eBay them. When I delivered a grinder the other week the customer took my own coat so I don't have one now! Sent from my iPhone using Arbtalk mobile app

Now we've upted the game!

This particular spec is approx £135K but we will be offering a good deal to the first taker. Sent from my iPhone using Arbtalk mobile app

Approx 10.

We have decided to bring in the Bandit 18SVC (screened vacuum chipper), this is a dedicated biomass chipper that will suit the market well. We will be bringing the trailed version although it is available as a forwarder package, capable of G30 & G50 spec amongst others this is a versatile chipper, it will also have the "top load discharge" for loading bulkers. As the name states this is an 18" capacity chipper so is capable of more than most but sits lower than the larger 30" chippers. This will be available for demonstrations & will be making appearances at selected shows throughout the coming year. Spec is CAT 350hp engine c/w 5yr warranty, radio remote control, auto reverse fan, 8ft infeed bed with 5ft conveyor, reversing autofeed, 45" diameter vacuum thrower, 32" wide feed rollers, tether remote, flow control, hydraulic stabilizer legs & hydraulic swivel discharge. Anyone wishing to view or request further info can contact me anytime. This is not available as a sub 750kgs model

There are a few angles for this argument but at the end of the day you need backup, there are good arguments for a dealer network providing your dealers stock machines, parts & these are a major part of their business & not a sideline. Ourselves choose to have no dealers & run everything ourselves which is fine as long as you can provide the same level of business, we run Nine mobile engineers, have a technical advice service & generally £750,000 worth of parts stock at any one time & all Seven days a week. There is no problem covering the Uk, Ireland & parts of mainland Europe but having a reliable machine helps somewhat.

Std fitment now, there pics on here of the new rollers & the flipper can be seen on the picture of the tracked chipper. Sent from my iPhone using Arbtalk mobile app