440 vs 460

[Marksquirrell]

I know this has been done but a little twist what would you guys get:

 

A spud'd 440/441

 

Or a standard 460/461?

 

All views and advice listened too [emoji106]

 

 

Sent from my iPhone using Tapatalk

[eddystihl]

Every day logging? . I had the same question but i am buying a new. 441 less vib s

 

 

Sent from my iPad using Arbtalk

[shillo]

do you want to buy my 441? its crap, keeps stalling when you pick it up, been back to radmore and tuckers a million times, they say there is nothing wrong with it.

[Joe Newton]

Spud mentioned that there's not a great deal you can do with the 441 in terms of porting.

 

Something to do with the placement of the piston ring in relation to the inlet port.

[RichieR]

I know this has been done but a little twist what would you guys get:

 

A spud'd 440/441

 

Or a standard 460/461?

 

All views and advice listened too [emoji106]

 

 

Sent from my iPhone using Tapatalk

 

How about a Spud'd 461

[Joe Newton]

If you're looking for a 70cc saw to sent Steve's way look at either a Husky 372 or a pre x-torque 365. Much more can be done to them.

 

I've a 357xp and an MS660 that Spud fiddled with. Both fantastic saws

[Johny Walker]

ms461,without a doubt, i think this could be the last off the proper built saws stihl make

[spudulike]

Spud mentioned that there's not a great deal you can do with the 441 in terms of porting.

 

Something to do with the placement of the piston ring in relation to the inlet port.

 

The 441 has a ring that ends just off the exhaust port stopping it being widened, can't recall if it is the top or bottom one as sometimes you can drop the lower ring to overcome this sort of issue - got one in at the moment, may take a look:sneaky2:

 

The 372XP (pre xtorq) and 357XP that Joe is talking about are superb saws for porting.

[Johny Walker]

The 441 has a ring that ends just off the exhaust port stopping it being widened, can't recall if it is the top or bottom one as sometimes you can drop the lower ring to overcome this sort of issue - got one in at the moment, may take a look:sneaky2:

 

The 372XP (pre xtorq) and 357XP that Joe is talking about are superb saws for porting.

 

can you port the 461

[stihlmadasever]

I know this has been done but a little twist what would you guys get:

 

A spud'd 440/441

 

Or a standard 460/461?

 

All views and advice listened too [emoji106]

 

 

Sent from my iPhone using Tapatalk

 

I wonder if spud'd will be in the next updated dictionary...