Jump to content

Log in or register to remove this advert

Show your tractors


Will Cobb

Recommended Posts

I wouldn’t personally drive on the road with that chipper on the front links - the tractor and linkage may be capable of lifting 3.5 tonnes but that doesn’t mean it is safe/mechanically sympathetic (the front axle and tyres will take a hammering, and you may not have a great deal of control). You could counter-balance it with something really heavy on the back but it’s always worth remembering that tractors are built up of various components held together with rings of bolts... 

The other thing to consider is leverage - the chipper is 2 (ish) tonnes centred a long way from the tractor. That’s a lot different to a 2 tonne (or possibly even a 3.5 tonne) weight block close in! If it looks and feels wrong I’d suggest you forget what it says in the manual.

  • Like 2
Link to comment
Share on other sites

Log in or register to remove this advert

On 3/29/2018 at 17:17, richy_B said:

Joined the full-size tractor club. Same Dorado 86. Been looking for a while and finally found one that suited me. Big thanks to Matt S on here for all the advice. I've got one to match his!

20180322_101813.jpg

Richy-B

For my needs and tastes, the perfect tractor, I have drooled over several, but until the DB1490 expires, I cannot justify another.

sigh!

  • Like 1
Link to comment
Share on other sites

Richy-B
For my needs and tastes, the perfect tractor, I have drooled over several, but until the DB1490 expires, I cannot justify another.
sigh!
Matt S gave me the idea and the more I looked into it the better it seemed. I came up from alpines so I wanted something that still felt comfortable on rough terrain. I've partnered it up with a 2.25m medium duty flail.

When money allows I'll get a medium size flail arm and a 6-8t trailer (not decided on what yet).
Link to comment
Share on other sites

  • 2 weeks later...

Wee Kioti working,

having wrassled and fought to get much smaller stones into the bucket,

I got the biggun in "first dibs"

Bloody diggerman cut me watermain despite being told exactly(& marked with a buried vertical paling stab) exactly where it was.

At least I found the telephone cable before he did!

 

DSC00200 getting a bottom for the kerbs and asphalt, for internet.jpg

DSC00195 same stane for the internet.jpg

DSC00197 not a bad wee stone for the internet.jpg

Edited by difflock
Link to comment
Share on other sites

Wee Kioti working,
having wrassled and fought to get much smaller stones into the bucket,
I got the biggun in "first dibs"
Bloody diggerman cut me watermain despite being told exactly(& marked with a buried vertical paling stab) exactly where it was.
At least I found the telephone cable before he did!
 
5ad20577436c3_DSC00200gettingabottomforthekerbsandasphaltforinternet.jpg.fba9797eb69cd50d7a82489e19b505c8.jpg
5ad205678f045_DSC00195samestanefortheinternet.thumb.jpg.6dd1048b93fed627fcb6922899ed579a.jpg
5ad205438c5fc_DSC00197notabadweestonefortheinternet.thumb.jpg.e8731ff5a4691a6b154d3d363276d8b3.jpg

What will the Kioti lift on the loader Marcus?
Link to comment
Share on other sites

2 Full straps of blocks = 1800kg, on a pallet with the pallet forks,

not bad for a tractor that barely weighs more than 2000kg

but limited reach, obviously.

With the low gears and fast hydraulics I can keep my foot fully off the clutch and let the tyres spin(a little only), to easily load the bucket or bulldoze.

The gear changes are v slick and naturally placed for the left hand, so the right hand can stay on the loader joystick lever.

All very natural.

And dead handy to either step on/off or indeed work the loader standing on the ground beside the tractor.

cheers

marcus

  • Like 1
Link to comment
Share on other sites

I paid 9k for a very clean coddled 2007 model with 1800 hours, direct from the first and only owner, a guy running a business maintaining paddocks and menages for horsey folk(only fault was leaking hydraulics, as I soon found out, but from a steel pipe near a valve block, an easy fix)

I had sussed the loader capabilities, a critical factor in my selection process, before I went to view.

The biggest weakness are the various transmission linkages running back and forward below/beside the belly of the tractor, and the vunrable mounting of the power steering ram in front of the front axle.

Oh! and a teensy/weensy wee fuel tank.

And horrible hard, non grippy industrial tyres.

So, not perfect by any means.

P.S.

When I bought Reco had just thrown up the UK dealership, so the second hand prices were probably suffering.

btw.

I really really really had the hots for a brand new 50HP Hurliman Prince c/w loader from Tunstall Tractors.

cheers

marcus

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.