Jump to content

Log in or register to remove this advert

Pine cones


Marcus Forster
 Share

Recommended Posts

Log in or register to remove this advert

Well, with very little information to go on, it is quite difficult to give any real objective view.

 

I would say however, that my initial impression is 'why?', so that leads me to ask who has advised this? Are they an arborist or similar?

 

If there is a safety justification, perhaps that the tree is defective in some way, then I would still fail to see how removing a few cones would make the tree any safer for a couple of reasons. Cones are not particularly heavy, so even if there are a few hundred cones, the reduction in weight would be minimal. If there is a defect, then surely solutions like limb removal or crown thinning would be more sensible? Trees are self-optimising structures and they will not add additional biomass to their structure if the tree was not mechanically adapted well enough to support the weight of the biomass (cones).

 

This is conjecture on my behalf as I've not seen the tree/situation, but I would be reluctant to agree to have this work done myself without a lot more information as to why this is being proposed.

 

Could you give more information and perhaps several pictures of the tree and its situation?

Link to comment
Share on other sites

I've removed cones from a Monterey pine before due to them falling on to the neighbouring property and breaking the roof tiles (not my spec, purely there to carry out the work). By the time we finished they did weigh a bit but as 10 Bears has said trees will adapt....

Edited by Andrew Gale
Link to comment
Share on other sites

i have a large (60ft) Monterey pine in my garden - the cones are large and very heavy, with up to 5 cones in each cluster. it is a fast growing tree, and the timber is relatively weak. we had a heavy snow fall a few years back that broke off about 1/4 of the crown, but i doubt that removing the cones would have made any difference. as previously said, a tree will do what it needs to do to stay upright.

Link to comment
Share on other sites

As tressrus said The cones on Monterey pine appear in clusters and are pretty heavy , and the combined weight close to the end of a branch does occasionally cause branch failure ..... the cones themselves stay on the tree for up to 30 years !!!.... I did a similar such job a year or 2 ago ( removing many cones ) but it is not easy removing the cones in their clusters and the end of branches where they appear !!

Link to comment
Share on other sites

Morning all

 

We have a large Monterey Pine that is in a communal garden area with a path and some patio type areas beneath it. I have been recommended to have 70% of the cones removed to reduce weight in the tree.

 

Can I get anyone's thoughts on this please?

 

Thanks

 

Marcus

 

Your money would better spent relocating the path / patio.... Or issuing hard hats. Sounds like a fools errand as described above.

Link to comment
Share on other sites

Well, on the basis of several assumptions, little information and no up to date pictures - it still seems a little like a fools errand to me.

 

As it is crown thinned, the weight is already gone (presumably). There are few targets beneath the tree, a path yes and the grassed area, but how often do targets ie people, occupy those spaces? Very little I would suggest. Also, when branches/cones are more likely to fall off ie in bad weather, then the targets are even less likely to be there.

 

My views could of course change if you subsequently post an image with a Sparassis crispa (cauliflower fungus) at the base or something similar!

 

Based on what you have said, the image and a measure of conjecture, I would not get the work done.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.