Jump to content

Log in or register to remove this advert

Fings wot broke


aspenarb
 Share

Recommended Posts

  • 2 weeks later...

Log in or register to remove this advert

Ten tonners turn this time.

 

A clatter and a bang after pulling out of a job with the loss of some brakes revealed a ripped off brake pipe and a stabbed rear tyre.

 

image.jpg2_zpsywylsqgk.jpg

 

image.jpg2_zpsmfxg6r66.jpg

 

Something else must have got inside the drum because one of the adjusters was bent and there was a lump out of the wheel cylinder, also the grease seal had been torn which in turn contaminated the brake linings.:thumbdown:

 

image.jpg4_zpstklzt3go.jpg

 

image.jpg5_zpslcui3kvt.jpg

 

image.jpg3_zpsv5nzrvph.jpg

 

image.jpg1_zpspuax2ehz.jpg

Edited by aspenarb
Link to comment
Share on other sites

Lots of new bits because the things in for test in a month so with brakes and balance its an axle overhaul.

 

image.jpg6_zpsvshtxdou.jpg

 

image.jpg2_zpsall19vyz.jpg

 

image.jpg1_zpskmqcyrvq.jpg

 

The seal was a funny shape on the outside so I spun up a press tool to push it in the hub ( too dear to butcher in with a hammer at £50 each)

 

image.jpg3_zpsyo77uhec.jpg

 

image.jpg4_zpsifbpvxiz.jpg

 

All back together

 

image.jpg1_zpskvtat1ep.jpg

 

 

And made up some new brake pipes for the axle. Its the 6mm stuff so you need a bender or it just flattens out.

 

image.jpg6_zpsn6ofrebp.jpg

 

image.jpg7_zpsdz9mvbjk.jpg

Edited by aspenarb
Link to comment
Share on other sites

Lots of new bits because the things in for test in a month so with brakes and balance its an axle overhaul.

 

image.jpg6_zpsvshtxdou.jpg

 

image.jpg2_zpsall19vyz.jpg

 

image.jpg1_zpskmqcyrvq.jpg

 

The seal was a funny shape on the outside so I spun up a press tool to push it in the hub ( too dear to butcher in with a hammer at £50 each)

 

image.jpg3_zpsyo77uhec.jpg

 

image.jpg4_zpsifbpvxiz.jpg

 

All back together

 

image.jpg1_zpskvtat1ep.jpg

 

 

And made up some new brake pipes for the axle. Its the 6mm stuff so you need a bender or it just flattens out.

 

image.jpg6_zpsn6ofrebp.jpg

 

image.jpg7_zpsdz9mvbjk.jpg

 

bob

what do you prefer

1,doing trees

 

2,or fixing kit that yr staff break :biggrin:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.