Fings wot broke

[arbwork]

not quite broke but running a lot hotter than all the other bearings, stitch in time

[PeteB]

Some belts there, Jeremy!

[arbwork]

Pete hello, hope you are well, we have just 200 ish hp going through so not over loaded and regularly see 360 hp tractors driving the same, but it has some days running 8 hours almost non stop so expected to replace parts every now and again, a hinge wore through the other day on one of the components covers! just tired I guess, cheers for now j

[aspenarb]

we have just 200 ish hp going through so not over loaded and regularly see 360 hp tractors driving the same, but it has some days running 8 hours almost non stop so expected to replace parts every now and again, a hinge wore through the other day on one of the components covers! just tired I guess, cheers for now j

 

Nice old school properly engineered piece of kit you have there Jeremy:thumbup1:

 

The landing leg was torn off the stump grinder, it was a bit short on range anyway so Mick Dundee knocked up an extended version with box section and a longer ram. No problem now

 

 

Plate on the bottom.

 

 

Jobs a goodun

 

[TIMON]

Mick looks like he's worth his weight in gold there Bob. 👍

[Al Cormack]

Nice old school properly engineered piece of kit you have there Jeremy:thumbup1:

 

The landing leg was torn off the stump grinder, it was a bit short on range anyway so Mick Dundee knocked up an extended version with box section and a longer ram. No problem now

 

 

Plate on the bottom.

 

 

Jobs a goodun

 

 

 

How did that happen Bob?

Edited May 30, 2016 by Al Cormack

[arbwork]

ta Bob more broke, went to use saw mill and the electrics gone gobbledegook , I need a Mike Dundee, electronics and hydraulics expert as well as a depot! next.

[aspenarb]

ta Bob more broke, went to use saw mill and the electrics gone gobbledegook , I need a Mike Dundee, electronics and hydraulics expert as well as a depot! next.

 

Bad news Jeremy. I spoke to the brother in law who is a Greek and he has translated those Hieroglyphics on the saw. Roughly translated it means take it back to the main dealer but take some lubricant with you.

 

Bob

[arbwork]

woodmizer hand book!! possibly in the category ''replace setworks control assembly'' I hope not, pictures historic one this but almost drove me to drink the lubricant!

[arbwork]

Bad news Jeremy. I spoke to the brother in law who is a Greek and he has translated those Hieroglyphics on the saw. Roughly translated it means take it back to the main dealer but take some lubricant with you.

 

Bob

 

Bob thank your brother-in-law for his reply Λυπάμαι να πω , αλλά αυτό δεν φαίνεται καλό , και από το εγχειρίδιο θα έλεγα ότι δεν εμπίπτουν στην '' συγκρότημα ελέγχου αντικαταστήσει setworks ''

catergory .

 

 

Lypámai na po , allá aftó den faínetai kaló , kai apó to encheirídio tha élega óti den empíptoun stin '' synkrótima elénchou antikatastísei setworks ''

catergory .