Oregon full skip chisel chain 3/8 .063 now available at chainsawbars.co.uk

[Rob D]

Have now finally got some full skip chisel chain in - shame oregon do not supply into the UK market but there you go... sourced from the US and a bit of a pain and long wait to get it hence price is not cheap.

 

 

It is not in the selector area you can find it here in the custom chain selector Custom chain loops

 

 

Full skip chain is best on bars 24"+ where the extra drive link between cutters helps carry woodchip more efficiently and keeps chain speed up. Also less teeth to sharpen Not used it myself yet...

 

 

I will get a larger range of this in ie. 3/8 .058 and .404 .063 if there is demand... the .404 skip chain seems a lot more expensive than the 3/8.

 

 

 

[C.J]

I usually have to wait 10 days for 75JGX,73JGX and 73LGX

 

3 days to cross USA and Atlantic and a week for the last 300 miles:banghead:

[shavey]

I usually have to wait 10 days for 75JGX,73JGX and 73LGX

 

3 days to cross USA and Atlantic and a week for the last 300 miles:banghead:

 

very true :lol:

[Coletti]

Have now finally got some full skip chisel chain in - shame oregon do not supply into the UK market but there you go... sourced from the US and a bit of a pain and long wait to get it hence price is not cheap.

 

 

It is not in the selector area you can find it here in the custom chain selector Custom chain loops

 

 

Full skip chain is best on bars 24"+ where the extra drive link between cutters helps carry woodchip more efficiently and keeps chain speed up. Also less teeth to sharpen Not used it myself yet...

 

 

I will get a larger range of this in ie. 3/8 .058 and .404 .063 if there is demand... the .404 skip chain seems a lot more expensive than the 3/8.

 

 

 

 

Any news on getting some 3/8 .58 rob?

[Rob D]

Not yet as such... possibly in the New Year.

 

 

Will add to this thread when I do get some.

 

 

[NFG]

Hi Rob,

 

Im up for some 3/8th by 0.058" full skip when you get it & another Rob D bar:biggrin:

 

N

[skc101fc]

Hi Rob. Would you consider looking at skip chain for us lucas millers . The chains are .404 , 063 , 27RX 3 or 5 skip.

The machine (10" lucas mill) is supplied with 5 skip which is good all round chain but cutting speed could be increased on softwoods or smaller diameter timber with the 3 skip.

I've tried making my own from conventional 404 saw chain with cutters ground away and angles changed but the chains snap too often,- I guess too much horsepower, and loads of vibration issues.

At 190 drive links per loop you wouldnt be too long getting through a hundred foot reel.

Shaun

[muttley9050]

I'd be up for a couple of 3 skip loops too.

[kernowstu]

Will buy from Rob D when he get's 404 in, but at the moment I get mine from here

frawleyssawshop on Ebay