Jump to content

Log in or register to remove this advert

Luck or judgement?


old snake
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Combo of both I think! The sink/gob cut looked a bit narrow and the tree is coming exactly where you want it but before it comes level with the ground sink/gob closes the hinge snaps and the weight of the tree takes it towards the fence. If the sink cut had been wider it would have come all the way down in line with the pull rope.

 

But either way tree down and little to no damage so jobs a good 'un !!

Link to comment
Share on other sites

 

you can cleary see it changed direction mid fall as the hinge holds on the side nearest the fence

 

:sneaky2:Well spotted. Like you say, there is a swing towards the fence as the tension goes from the pull-line. and a very close finish...

 

 

Judged to be lucky..:001_tongue:

Link to comment
Share on other sites

I still maintain judgement.

 

Rubbish Tommer :001_smile:

 

There needed to be a little allowance for the crank of the trunk at the top, the hinge looked to be running in line with the fence where is should have been kicked away slightly.

 

Signed

 

Dean Lofthouse Master faller BSC / WALOB

Link to comment
Share on other sites

Rubbish Tommer :001_smile:

 

There needed to be a little allowance for the crank of the trunk at the top, the hinge looked to be running in line with the fence where is should have been kicked away slightly.

 

Signed

 

Dean Lofthouse Master faller BSC / WALOB

 

After watching it for the third time, i had to agree that luck played a part. I think that the twist toward the fence was the weight of that timber at the top, i reckon without that it would have come down straighter.:001_smile:

 

I stand corrected.:001_smile:

Link to comment
Share on other sites

Cheers guys i hear wot your sayin about a bigger gob but there was a great big hole in one side of the tree and i wanted to try and leave as much sound wood as possible to use for the hinge. I like the idea of usin the butress roots to hold it though steve.

 

Here's a pic of the stump

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.