Jump to content

Log in or register to remove this advert

lifting fence panels into concrete posts


s.varty
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 29
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

With 6x5's I use step ladders, I lift them like a diamond shape, top left or right corner pointing up, once up in the air lower the panel so it sits between the posts, still like a diamond. At this point the full weight of the panel is sat on the posts and you get your strength back ready for the next lift. Then pick up the panel and inch it round in between the slots of the concrete posts until you get it vertical, the key is to letting the concrete posts take the weight whilst you manoeuvre it round until it's ready to drop. It's the only method I use when I'm on my own and it works every time.....unless it's a 6x6 on a windy day!

Link to comment
Share on other sites

  • 4 weeks later...

Problem solved , place panel on ledge bolted 4ft up the ladder, stabalize the panel with a screw 2ft higher up. then all you have to do is lift the whole lot 2ft off the ground and walk it in, drop it into the posts and undo the screw. done 10 today in a fairly strong wind with no problems.

002.jpg.c221d2e63b678ca6f71b074a43b5d1e4.jpg

001.jpg.33a8c9c3adadfda375c813dba49ccb79.jpg

Link to comment
Share on other sites

Problem solved , place panel on ledge bolted 4ft up the ladder, stabalize the panel with a screw 2ft higher up. then all you have to do is lift the whole lot 2ft off the ground and walk it in, drop it into the posts and undo the screw. done 10 today in a fairly strong wind with no problems.

 

 

Where there's a will, there's a way!👍

Link to comment
Share on other sites

Problem solved , place panel on ledge bolted 4ft up the ladder, stabalize the panel with a screw 2ft higher up. then all you have to do is lift the whole lot 2ft off the ground and walk it in, drop it into the posts and undo the screw. done 10 today in a fairly strong wind with no problems.

 

Eureka!

 

thanks for sharing, may come in handy, not always easy getting hired help just for the odd day here and there.

Link to comment
Share on other sites

Well done Steve, you obviously put your Carol distractions away from your mind that day and applied 100% of your mental prowess to the job.

 

With a back saving non finger trapping result.

 

Cheers for that, and I don't want to see any of you lads on dragons den either. :laugh1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.