Jump to content

Log in or register to remove this advert

Lets have some fun re pick up trucks


wisecobandit
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Ummm, but Wisecobandit as engineers better understand the ICE and metals and ceramics et al.

And with better quality fuels, technology and electronics.

Perhaps not?

Be so likely to spit the dummy out, that is.

So!

Dinny be such a Luddite.

 

Without doubt as you say technology moves on so it will be interesting. Like most things tho it wont show for years and theres also the question of how many are actually going to be used for the purpose intended :confused1: Most will end up as Chelsea tractors no doubt so wont be pushed to any limits. They certainly wont sell to many given there price etc.

It does make you wander tho along the lines of the first l200 non turbos which where trouble free and then when they banged a turbo on them for more power and effeciency the heads went 5 years down the line and then shortly after the bottom ends start to knock or the k series rover 1800 headgasket issues.

Link to comment
Share on other sites

Without doubt as you say technology moves on so it will be interesting. Like most things tho it wont show for years and theres also the question of how many are actually going to be used for the purpose intended :confused1: Most will end up as Chelsea tractors no doubt so wont be pushed to any limits. They certainly wont sell to many given there price etc.

It does make you wander tho along the lines of the first l200 non turbos which where trouble free and then when they banged a turbo on them for more power and effeciency the heads went 5 years down the line and then shortly after the bottom ends start to knock or the k series rover 1800 headgasket issues.

 

Exactly the sad case with David Brown, as was.

Introduced a cracking 4 cyl engine with 3 big ends , knocking out about 40HP.

Then pushed this same basic block to near double the HP, still with 3 big ends.

Ditto the superb David Brown 3 point linkage, fine for a 40HP 2wd tractor, but sorely inadequate for twice the weight and HP.

Essentially unchanged.

AS I found out when I bust the DB1490 ramshaft and discovered just how doncy the actual arrangment was:blushing:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.