T540xp vibration mounts damaged!

[CJM]

If it breaks pretent you use a bungy tool strop otherwise they might refuse to fix it. When I took mine In they asked me if I used one I said yes they went on to say if I didn't use one it'll put more shock on the mount if I wasn't using one and husquvarna will refuse to fix it. Just s heads up chaps

Edited October 17, 2014 by CJM

[MWArb]

I always bungy, I must be nice to mine.. note my spring has only bent a fraction (and I mean a fraction) and no damage elsewhere, is it still 2 years on the warrenty?

[CJM]

My saw has been a complete knacker. 5 rear av springs, new software, new side plate, new chassis and now it's in for a new coil. Chassis took 2 weeks to fix the dodgy software took 4 weeks and this new coil is on its way to being 3 weeks until I get my saw back. I bought the saw in April so I've had to rely on my work mates to lend me their 200s and 201s which isn't acceptable really

[MWArb]

My saw has been a complete knacker. 5 rear av springs, new software, new side plate, new chassis and now it's in for a new coil. Chassis took 2 weeks to fix the dodgy software took 4 weeks and this new coil is on its way to being 3 weeks until I get my saw back. I bought the saw in April so I've had to rely on my work mates to lend me their 200s and 201s which isn't acceptable really

 

Man either my saw is gold or yours is a shocker:001_huh:.. I've not had a single issue with mine, now I do clip it to my harness with the short clip and I'n not rough on my kit so guessing thats why but I cant believe how many people have broken it.

[JosephD]

after 2 weeks waiting for the spare parts my saw is finally fixed , quite a simple fix and not too expensive , will try and be a bit more careful with it next time.

[peatff]

The spring in the earlier picture looks like it needs a stretch to take some of the tension out of it so it doesn't stress the anchor point so much.

[skyhuck]

after 2 weeks waiting for the spare parts my saw is finally fixed , quite a simple fix and not too expensive , will try and be a bit more careful with it next time.

 

I hope you didn't pay!!!

 

Its a warranty job.

[Tree Man Tom]

I hope you didn't pay!!!

 

Its a warranty job.

 

Replaced three now, had to pay for mine??

[Stubby]

Replaced three now, had to pay for mine??

 

Do you mean just springs or the whole grey plastic pan that carries the spring mount ? As was the case in the saw above

[Tree Man Tom]

Do you mean just springs or the whole grey plastic pan that carries the spring mount ? As was the case in the saw above

 

I thought in the case of the OP it was just rear spring