Jump to content

Log in or register to remove this advert

Moisture level drop in stacked Roundwood?


arboriculturist
 Share

Recommended Posts

We dry 3000 tonnes a year on a windy site and after 2 years the top of the stack is close to 25%MC. Bottom metre or so can be 40% as the wind does not get through. Stacks are up to 5 metres high and uncovered. Variety of species but a lot of larch. Average diameter around 400mm. Some up to 1metre dia which are obviously much wetter.

Prevailing wind hits at 45 deg so blows up between the stacks and through them.

All measurements taken in dry weather.

Regards

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 35
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I'll start again,been a long week and weekend for me, the poles they use at APF are approx 30 to 35 mtrs in hight total bout 100ft with 10 plus mtrs in the ground 10 to 15ft with 25 mrts above ground bout 85 mtrs.

 

Weighed 6.5 tons when used them at show in 2012 then stacked in farm yard for 2 years then reused this year2014 and weighed in at 4.5 tons with a moisture loss of 2 tons 40 to 60% loss in moisture.think got it right now I can go back to bed:confused1:

 

Hi shires I'm told they come from long leat forestry or Lord bath thanks Jon

Link to comment
Share on other sites

Now I understand how you can feed 50 tonnes/hour through a chipper!

Sorry Spaceman memory must be going. Had a look today and the wood we were chipping had a lot of small in it so I would say an average of 300mm dia. Chipper crane just picks up several instead. Some other batches would average 400 but not the one we were chipping.

The guy who operates the chipper and crane is very good and with 780hp it doesn't slow down for much.

Link to comment
Share on other sites

We dry 3000 tonnes a year on a windy site and after 2 years the top of the stack is close to 25%MC. Bottom metre or so can be 40% as the wind does not get through. Stacks are up to 5 metres high and uncovered. Variety of species but a lot of larch. Average diameter around 400mm. Some up to 1metre dia which are obviously much wetter.

Prevailing wind hits at 45 deg so blows up between the stacks and through them.

All measurements taken in dry weather.

Regards

 

Thanks for that data-brilliant

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.