arbtalkers arbtrucks

[testcricket01]

tidy!

we've been using one of those shape mitsi's - suprisingly capable off road - it towed a tracked chipper on trailer through some boggy mud quite easily. i was prepared to get stuck and use the chipper to pull it out.

 

I had herd they were pretty good offroad i dont think mine will be going offroad properly but its nice to no you can.

[Peter]

I found those pretty good on the slippy stuff, I think it's the traction control, they don't wheelspin unless all four wheels loose traction.

 

 

Sent using Arbtalk Mobile App

[testcricket01]

I found those pretty good on the slippy stuff, I think it's the traction control, they don't wheelspin unless all four wheels loose traction.

 

 

Sent using Arbtalk Mobile App

 

We will be in contact with you soon peter to get a pro tipper fitted to it some point.

[RobRainford]

After 2 years my chip box finally gave in. The bolts holding a corner pulled through the ply eventually and it was shifting around a bit. Still held on but all the front wasnt in good shape.

 

It was on the way to site too this morning. Just what I needed!

 

Tipped it off the truck and it fell into a heap. Most of it was rotten so looks like ill be building a new one.

 

Managed to scrounge some boards whilst on site. Including a white board which doubles up as a notice board and headboard for chip too.

 

 

 

[RobRainford]

Chip box had a bit of a tidy up. Tidied off the rough edges and have it a bath in creocote. Pleased with the results.

 

Signs within the next few weeks

 

[mendiplogs]

My mates landy at the arb show was getting a fair bit of attention.

 

HI TOM that looks nice mat well done there jon

[D A Tree Surgeons]

My Trusty old Hilux

[alex_m]

Used my pickup in anger for the first time today, towing a nice trailer load wood. Seriously impressed by the engine, powered through the gears despite nearly 3t on the back.

[testcricket01]

Finally picked up the latest toy

 

 

 

Sent using Arbtalk Mobile App

[Martyn Amos]

not a bad size boot for the chip...