Jump to content

Log in or register to remove this advert

Smoke and lots of it!


Old Mill Tree Care
 Share

Recommended Posts

I used my 395xp for a few hours on Monday and it was perfect.

It struggled to start the next day and then ran very smokily without improving.

It's slow to pick up when I squeeze the trigger and needs several pulls to start when warm. Usually starts on first pull.

It's always been run on Aspen.

The weather is extremely humid but my container is not too bad inside. (dehumidifier).

 

The smoke is quite white, to my eyes.

 

Any thoughts guys? I am panicking as it's my only big saw.

Thanks.

Link to comment
Share on other sites

Log in or register to remove this advert

My first thoughts, had you not been using Aspen, would be contaminated fuel.

Of course, this still could be the case depending on your fuel management.

 

Is it possible that some chain oil has been added to the fuel tank in error, maybe just a little before the mistake was realised?

 

In any case, I think my first action would be to drain and flush the fuel tank, refill with fresh Aspen and try again.

 

Good luck.

 

Barrie

Link to comment
Share on other sites

During the summer I had a climber fill two saws a 460 and a 200 with oil in the fuel tank in realising what he did he emptied it and rinsed them both out the 200 was fine the 460 smoked like a bitch while trying to get finished. He stripped it all cleaned it all and reassembled fine. Same climber filled a 338xp with oil 3 weeks later saw in skip lad down the road.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.