Jump to content

Log in or register to remove this advert

Aspen after conventional 2 stroke mix?


Kay 9
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 34
  • Created
  • Last Reply

Top Posters In This Topic

I usually change the carb parts and fuel line if the machine has run on conventional fuel for a couple of years when converting to Aspen.

 

It is common to get the fuel seeping around where the fuel line enters the tank and seals when converting over without doing this. You may be lucky but this is what I do if I get a request for conversion.

Link to comment
Share on other sites

18.70-20 quid eh, suppose we're not too badly priced then. Thanks. I'll keep an eye on it spud mate. All seems fine so far. Did some firewood this eve and is running good as ever.. :) don't mind changing the fuel line if i have to.. Just never worked on an autotune carb so fingers crossed I don't have to go stripping that :beer:

Link to comment
Share on other sites

I'll keep an eye on it spud mate. All seems fine so far. Did some firewood this eve and is running good as ever.. :) don't mind changing the fuel line if i have to.. Just never worked on an autotune carb so fingers crossed I don't have to go stripping that :beer:

 

its normally the low side that needs a small tweak anyway.

Link to comment
Share on other sites

Thanks so much people. Already went out and tried it. No problems.. :) spluttered a little at first but no biggy. They definitely need to improve on the can though, as no matter what angle it's poured at it seems to drip a little :rolleyes:

 

This is the ideal solution and is available from all Aspen dealers, either in stock or to order Aspen Fuel :: Aspen Fill Partner

 

otherwise I suggest pouring with the can horizontal and using a funnel when possible :thumbup1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.