Jump to content

Log in or register to remove this advert

Karabiners failing loler inspection.


stuartc44
 Share

Recommended Posts

Hi,

Someone who I work with has had five karabiners failed by our loler inspector. The krabs are all new DMM ones of the same type that have never been used. They were failed because you can just, and some only just, get the gate to stick open if you twist it while closing it slowly. As they hadn't been used they were sent back to DMM who returned them and said they were fine, nothing wrong with them but our inspector still won't pass them. Has anyone else had this problem?

 

I think the inspectors correct, if they can get them to stay open they fail.

 

Has he tried graphite powder I find it normally does the trick in this situation

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

If he does not have a receipt/record of them being brand new they will need a loler or if they are brand new, unused but 6 months old they will need a loler.

 

Yes I find graphite powder excellent for freeing up sticky krabs. I have used wd40 or similar in the past and find it works well, is this acceptable?

Link to comment
Share on other sites

The krabs had been bought some time before the rest of his kit was due to be inspected, when his kit was due they were just added into his kit.

Graphite or wd40 wouldn't help in this case as it is the twisting out of line that makes them stick, nothing else.

The real concern here is that DMM say there is nothing wrong with them and two of our loler inspectors won't pass them.

Link to comment
Share on other sites

The krabs had been bought some time before the rest of his kit was due to be inspected, when his kit was due they were just added into his kit.

Graphite or wd40 wouldn't help in this case as it is the twisting out of line that makes them stick, nothing else.

The real concern here is that DMM say there is nothing wrong with them and two of our loler inspectors won't pass them.

 

Ahh didn't read that bit properly

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.