bottle jack fell

[cosworth]

bottle jack fell we did saturday

[Pete Mctree]

Good job. Did you back it up with a couple of wedges? Be nasty if you popped a seal mid fell.

[Rich2484]

Why did you do it? Was it needed or a case of cause we can??

[cosworth]

Good job. Did you back it up with a couple of wedges? Be nasty if you popped a seal mid fell.

 

ye had a couple of wedges each side just incase

[Big 'Ammer]

Neatly done.

[cosworth]

Why did you do it? Was it needed or a case of cause we can??

 

the farmer wanted in the top field and it was leaning the wrong way so we tried a bottle jack did the job,

[Stubby]

I've done that . Good feeling when it gets over center .

[testcricket01]

the farmer wanted in the top field and it was leaning the wrong way so we tried a bottle jack did the job,

 

Nice job

 

One thing i found out in the couple of fells ive done with a bottle jack the jack goes into the wood it needs a bigger wider plate welded on the top to spread the force of the jack to stop it punching through the wood

[Brushcutter]

Nice job.

 

I've done lots of bottle jack fells and makes it so much easier. As already said you want to back up with wedges and have either a wedge or a steel plate on top of the jack or they tend to dig into the wood.

 

 

I'd of put the jack in the stump though rather than cutting a notch in the timber.

[cosworth]

Nice job.

 

I've done lots of bottle jack fells and makes it so much easier. As already said you want to back up with wedges and have either a wedge or a steel plate on top of the jack or they tend to dig into the wood.

 

 

I'd of put the jack in the stump though rather than cutting a notch in the timber.

 

there was barbed wire lower down so we went abit higher and cut into the top half instead,i know what you been brush cutter