Sugihara bars

[Rob D]

I have got some Sugi nose fixing kits for the larger noses... These are £16-00+vat need to get them up on the website

 

 

Or you can just use a punch to drift the rivet out - put the new nose and rivets in then flatten out.

 

I've used the chain breaker for this then ground the rivets flat.

[Brushcutter]

Not sure - what bar is that you have?

 

13" Sugi light weight.

[Rob D]

13" Sugi light weight.

 

 

 

That would be a small nose kit but not got any of those until next order is here...

[forest tink]

I have got some Sugi nose fixing kits for the larger noses... These are £16-00+vat need to get them up on the website

 

 

Or you can just use a punch to drift the rivet out - put the new nose and rivets in then flatten out.

 

I've used the chain breaker for this then ground the rivets flat.

 

that's pretty much how I was thinking I would do it,cheers rob

 

ps get them fixing kits up so we can get a look

[Rob D]

that's pretty much how I was thinking I would do it,cheers rob

 

ps get them fixing kits up so we can get a look

 

 

I've got them for the large noses - you need a proper ungiving metal surface to use it but they seem to work well.

 

 

Getting x100 of both small and large kits for next Sugi order.

 

 

[steve7962]

Hi rob, any sign of sugihara bars for the husky 540's?

 

Cheers, Steve

[RichieR]

Hi Steve I was on the phone to rob on Friday yep they are in

[Rob D]

Hi Steve - the bars all came in on Monday and I spent the whole week lifting boxes.... there are going to be so many options that I need to sort through exactly what is what.

 

 

But the bars for the T540XP are now up there and listed (still have PRE - ORDER) in front of them - but they are there.

 

 

So fill your boots + you will get a good throw in.

 

12", 14" and 16" pro lam and light type.

 

Also have 1/4" bars but no one can seem to find a 1/4" sprocket for the T540XP!

 

 

[TheHungrySquirrel]

Rob do you have 15" .325 in for a 550??

[Rob D]

Rob do you have 15" .325 in for a 550??

 

 

Yes - again stick the 550XP in as an option and you have a large range of bars they're all .325

 

 

In fact there are loads of options now - you can have .325 .063 both in pro lam or light type so if you run Stihl and Husky saws you can stick with one chain type.

 

 

Also have 3/8 lo pro bars and 1/4 bars that will fit the 550 as well as a 20" Q tip bar... And the VH mount bars which will run 3/8" standard .058.

 

 

So a lot of choice and can't put these on the chainsawbars.co.uk website as it stands because will just lead to confusion so there will be a new website coming soon...

 

 

All the bars marked PRE ORDER are in stock.