Jump to content

Log in or register to remove this advert

Aldi saw


Rich2484
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

I got one of these about four years ago (given to me by my father, who has never got on with petrol tools).

 

It is not a patch in build quality on my baby Husky 235 but has got enough grunt for the 16" bar (IMHO).

 

I've done all my firewood for a couple of years, cleared some bits of roots, sawed up chunks of kitchen worktop and it still goes okay (after sharpening the chain!)

 

Downsides:

 

- when it was about six months old the recoil on the starter cord packed up; I opened it up and found it had been "oiled" with some kind of vegetable oil at new, which had cloyed with age - after uncoiling the chain, cleaning with petrol and re-oiling with 20/50 it has been fine ever since

- it will start okay from cold and hot, but put it down for about 20 minutes and then try to get it going again and you'll be struggling

- it is nowhere near as easy to start as the Husky, mainly I think because there's no primer pump on the carb

 

Upsides:

 

- I paid nowt for it, which makes it even more of a bargain than the Aldi version :thumbup1:

Link to comment
Share on other sites

I've got an older one. With its narrow kerf chain it cuts well when its running. It is tiring to use though and the clutch gives up after half an hours use. Apparently, they aren't regarded too highly in the criminal world either. When my other stuff was nicked they left the Aldi saw behind.

Link to comment
Share on other sites

I've got an older one. With its narrow kerf chain it cuts well when its running. It is tiring to use though and the clutch gives up after half an hours use. Apparently, they aren't regarded too highly in the criminal world either. When my other stuff was nicked they left the Aldi saw behind.

 

I'm going to get some green paint and do all the stihl saws in it. Never get stolen again :laugh1:

Link to comment
Share on other sites

I dunno but starting it with the chain break off on full throttle tells me he hasn't had much training????

 

I believe that's the way you started a saw back in the day, as I almost failed a interview by not doin that. Lucky enough I grabbed my old college booklets and called nptc for conformation . They then changed the assessment lol

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.