Jump to content

Log in or register to remove this advert

The Land Rover Appreciation Group.


John Hancock
 Share

Recommended Posts

Log in or register to remove this advert

I have been considering putting an axle diff lock on my 110 pickup for some time.

 

This is to assist with pulling loaded trailers away on soft ground and with pulling trees over.

 

Come on you landy boffins' date=' should I put it on the front or rear axle, and give reasons why? :001_smile:[/quote']

 

Yes, ARB diff lockers front AND rear plus an air compressor. Will cost you about £1500 though :thumbdown: well worth it though IMO only if you've got that kinda money lying around... :thumbup:

Link to comment
Share on other sites

I have been considering putting an axle diff lock on my 110 pickup for some time.

 

This is to assist with pulling loaded trailers away on soft ground and with pulling trees over.

 

Come on you landy boffins' date=' should I put it on the front or rear axle, and give reasons why? :001_smile:[/quote']

 

I would say rear, its where the weight will be (if its loaded) and you will still be able to steer.

Link to comment
Share on other sites

Front and rear lockers would be ideal, but a bit pricey.

 

I'm thinking about one axle.

 

If conditions were that extreme that all four wheels needed to be locked, the trailer would probably be bogged anyway.

 

Likewise, if conditions were that loose or sticky,I wouldn't be contemplating using the land rover, I'd do it a different way.

 

We often pull trees over with the landy.

 

Its handy to reverse and the driver can watch the cutter easier.

 

The weight of the engine is over the front axle.

 

The trailer should really only put its nose weight on the back end.

 

I don't load the back of the truck with a big lot of weight, its mainly tools, signs, cones, etc.

 

I don't expect to need to travel any distance, and certainly not on tarmac, so I don't think steering would be an issue.

 

So I was wondering whether a front axle lock would be more suitable for my needs, rather than the conventional rear axle lock as fitted to Jap pickups?

 

Or, will it not make any difference?

Link to comment
Share on other sites

Back at post No. 148, i guess i was correct then!

 

Only a small point, but its a common misconception about the diff lock on a defender. The standard diff lock only locks the diff between the axles that enables constant 4WD, it does not lock the axles themselves.

 

Technically, it is no more efficient than a Hi Lux etc when you engage 4WD.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.