Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

just after a bit of advice ladies and gents :001_smile: thinking of selling my ifor williams twin axle trailer as its too small to fit my tractor and topper on, i need to sell this to fund buying a bigger trailer. a mates dad has an indespension twin axle for sale will take 3 and a half ton good tyres floor brakes etc but has no sides and no ramps and he is asking £1000. do you think this is a realisitic price without sides and ramps as its just essentially a flat bed at the moment and i would have to buy ramps and sides for it to be any use. Any advice would be appreciated

 

cheers

Log in or register to remove this advert

Posted

Im no experts on trailer prices but just bought a twin axle tilt bed brian james trailer lovely condition from orange plant for £500.00 for the trcked chipper so going on this £1000 for the one in question does sound abit step.

Posted

What do you plan on pulling it with for it to 'take 3 and a half ton'? Are you sure it isn't a 3.5 tonne gross trailer?

 

Do you need the sides or is a flat bed good enough?

 

Can you keep the ramps you already have?

 

How much are you looking to sell yours for, price to change is the figure you need to be interested in

Posted
What do you plan on pulling it with for it to 'take 3 and a half ton'? Are you sure it isn't a 3.5 tonne gross trailer?

 

Do you need the sides or is a flat bed good enough?

 

Can you keep the ramps you already have?

 

How much are you looking to sell yours for, price to change is the figure you need to be interested in

 

would have thought its 3.5 ton gross meaning a carrying weight of around 2650kg

would you not be better buying a brand new one better for tax bill next year

Posted

Used trailers (particularly the ifors) hold their money, well less desirable makes like indespesion and Brian James less so but still well enough

 

You don't say how old the trailer is but as long as the condition is good that need not matter. You need to price the bits you will need to add which will give you a comparison value. Get that and have a look what you would get for your money elsewhere. The eBay completed listings tab is usefull for that.

 

You can always take what you have to a dealer and ask them how much money to swap for the model you want.

 

Beware when buying used a set of brake linigs will run you to about seventy quid per axle and boden cables aren't cheap either.

Posted

UThanks for the advice guys. Yeah I meant 3.5 gross weight, will be pulling a fergie tractor and topper/logsplitter most of the time, but will need sides for logs and carrying round bales of hay for wides horses!! So will take advice and price in what I need and see what figures I come up with, the only benefit of this one is I know exactly what it has done as its only had one owner being used for moving coils of land drain pipes, hadnt thought about buying new but may look in to it, wont be used everyday so not sure if I can justify a brand new one would be nice though!!

Posted

unless you can get it for £500 leave it where it is will cost nr a grand for sides and ramps. I had an indespension 3.5 tonne trailer I dont like the rubber suspension units especially when they get old and the bearings look very small. I think the ifor is a much better trailer.

Posted

I doubt she would appreciate it!!! I blame it on touch screen phone just as well she dosent look on here otherwise I would be in the dog house, however just in case she is I meant my lovely wonderful wife..!!

Posted

We have a spare set of Ifor Williams sides as we had a trailer stolen when the sides were not fitted, if you decide to purchase the trailer we can see if these are the same size.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.