Jump to content

Log in or register to remove this advert

One reason I use Aspen


GardenKit
 Share

Recommended Posts

Log in or register to remove this advert

Just bought a fs 490 and was running it on aspen from the off, what I noticed was that it was sluggish on pick up after a couple of days I forgot the tub of aspen so had to put pump fuel in it after a couple of tanks the pick up was fine any thoughts?

Various fuels have various specific gravity (density).

Aspen is slightly different to petrol in that respect and may just need a very slight adjustment to the low speed screw on the carb.

This is the screw marked 'L' and may need turning out (counter clockwise) by about 1/8 of a turn.

Try this and the pick up should be improved. You should then not have to alter this back for petrol.

Let us know how you get on.

Link to comment
Share on other sites

Various fuels have various specific gravity (density).

Aspen is slightly different to petrol in that respect and may just need a very slight adjustment to the low speed screw on the carb.

This is the screw marked 'L' and may need turning out (counter clockwise) by about 1/8 of a turn.

Try this and the pick up should be improved. You should then not have to alter this back for petrol.

Let us know how you get on.

 

Hi thanks for the reply but is the fs490 m tronic?

Link to comment
Share on other sites

Hi thanks for the reply but is the fs490 m tronic?

Err, yes. I missed that.

 

Being M tronic it should tune itself to any fuel, so I cannot understand the problem you have.

How severe is the bogging down?

 

What I do understand though, is that any engine will run happily with Aspen, it is after all, a purer product than petrol.

 

I did some fact-finding whilst in Sweden last week, asking sellers, and users their opinions of Aspen. These guys use way more than we do and report no problems.

Link to comment
Share on other sites

Err, yes. I missed that.

 

Being M tronic it should tune itself to any fuel, so I cannot understand the problem you have.

How severe is the bogging down?

 

What I do understand though, is that any engine will run happily with Aspen, it is after all, a purer product than petrol.

 

I did some fact-finding whilst in Sweden last week, asking sellers, and users their opinions of Aspen. These guys use way more than we do and report no problems.

 

I also have the fs 460 which has only been run on pump fuel that is fine , but the 490 would just bog down for the first couple of seconds when pulling the trigger in , I know a couple of seconds is not a lot but when in the forest its a pain I will say when running on aspen once it was at the right revs blipping the throttle it responded alot better than the 460

Link to comment
Share on other sites

I also have the fs 460 which has only been run on pump fuel that is fine , but the 490 would just bog down for the first couple of seconds when pulling the trigger in , I know a couple of seconds is not a lot but when in the forest its a pain I will say when running on aspen once it was at the right revs blipping the throttle it responded alot better than the 460

Hi Andy,

 

 

As has already been said Aspen is a different fuel and so sometimes needs a carb tune to get the best from running Aspen.

 

With the auto tune Saws do they have a set up procedure to reset them?

 

If so this might get it running 100% right on Aspen.

 

Please contact direct me if your Saws are still not running as you would like on Aspen.

 

[email protected]

 

07568108953

 

 

Kind regards

 

Eddie

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.